GiancarloSFL 15 Report post Posted September 22, 2013 I did I don't know if it's necessary but did any ways. Quote Share this post Link to post Share on other sites
laserrobottime 149 Report post Posted September 22, 2013 At least. The skates get very soft when baked. Let them harden up for a day or two. Quote Share this post Link to post Share on other sites
DRW1319 3 Report post Posted September 22, 2013 Given how much you pay for them why not just wait the 24 hours? I did with mine. Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted September 22, 2013 (edited) I emailed Scott and he said an hour or two is fine. Edited September 23, 2013 by kadayo Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted September 23, 2013 I was able to skate on my new VH skates at a public session yesterday. This is the first time I have ever not had blisters,severe pain on my arches or on the outsides of my feet after skating on a new pair of skates. The skates are extremely light as you will see in the pictures. 660 grams for the right skate and 650 grams for the left skate. I was a size 6 in my old skates so that would explain why these are so light. I am very impressed by the quality of the skates and the fact that they were created from just a few measurements and a tracing of my foot. Worth every penny in my opinion. On thursday I have a practice and will post back after actually playing hockey on them. So far so good though. I even had someone come up to me and ask if they were custom VH skates. I guess the word is getting out there. Let me know if anyone has any questions. Happy to answer anything. Quote Share this post Link to post Share on other sites
Larry54 243 Report post Posted September 23, 2013 I know they're light but you have to admit the T-Blades literally tip the scales in your case. Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted September 23, 2013 I know they're light but you have to admit the T-Blades literally tip the scales in your case.I have been using T-Blades since 2001 and they have always made my skates lighter but these skates are a whole new level of light. I have my old Graf 705's and Graf Ultra G5's on hand still. I will have to do a weight comparison. Quote Share this post Link to post Share on other sites
Larry54 243 Report post Posted September 23, 2013 I have been using T-Blades since 2001 and they have always made my skates lighter but these skates are a whole new level of light. I have my old Graf 705's and Graf Ultra G5's on hand still. I will have to do a weight comparison.Well, my VH skates are lighter than my Flexlite 4 skates. And this photo from the VH Hockey website, of a size 6 skate with LS2 might put things into perspective.http://www.vhspeedskating.com/assets/images/hockey/size_6.jpg Quote Share this post Link to post Share on other sites
romdj 26 Report post Posted September 23, 2013 weight is such an overrated aspect compared to the fit, comfort, mobility and protection. Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted September 23, 2013 weight is such an overrated aspect compared to the fit, comfort, mobility and protection.I agree. These skates have it all though! 1 Quote Share this post Link to post Share on other sites
retroXvertigo 4 Report post Posted September 26, 2013 One more overtime shift and my order is going in. Quote Share this post Link to post Share on other sites
IPv6Freely 2092 Report post Posted September 26, 2013 I have Makos now, but damn are these ever tempting. Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted October 7, 2013 Update time. I've been using the skates for a few weeks now and have had a lot of ice time. The skates are incredibly comfortable and feel great for the entire time I am on the ice. I have had no blisters, pain, or discomfort of any kind. This is a new concept for me. I have two very different size feet along with unusually high arches coupled with a wide foot and extremely deep instep. Needless to say a custom skate was really my only option for a well fitting skate. These skates have answered my prayers. I had some Graf custom insoles fitted on Friday at West Side Skate and Stick in NYC. They made the skates even more comfortable. The only negative I could find so far with these skates is that I had to have the T-blades re-riveted due to the wrong rivets being used initially. I was told by the gentleman that did my custom footbeds that the rivets used were much too long. No problem really and was only a $15.00 service. I highly recommend the custom footbeds by the way. Really amazing. I guess the only remaining issue with these skates is the durability, but I guess time will tell on that front. If anyone has any questions please let me know. Quote Share this post Link to post Share on other sites
flip12 712 Report post Posted October 8, 2013 Update time. I've been using the skates for a few weeks now and have had a lot of ice time. The skates are incredibly comfortable and feel great for the entire time I am on the ice. I have had no blisters, pain, or discomfort of any kind. This is a new concept for me. I have two very different size feet along with unusually high arches coupled with a wide foot and extremely deep instep. Needless to say a custom skate was really my only option for a well fitting skate. These skates have answered my prayers. I had some Graf custom insoles fitted on Friday at West Side Skate and Stick in NYC. They made the skates even more comfortable. The only negative I could find so far with these skates is that I had to have the T-blades re-riveted due to the wrong rivets being used initially. I was told by the gentleman that did my custom footbeds that the rivets used were much too long. No problem really and was only a $15.00 service. I highly recommend the custom footbeds by the way. Really amazing. I guess the only remaining issue with these skates is the durability, but I guess time will tell on that front. If anyone has any questions please let me know.Good to hear about the custom footbeds with thermoplastic-base boots, I had been wondering about that, but I couldn't remember anyone mentioning that combination at all. Quote Share this post Link to post Share on other sites
Larry54 243 Report post Posted October 9, 2013 (edited) Good to hear about the custom footbeds with thermoplastic-base boots, I had been wondering about that, but I couldn't remember anyone mentioning that combination at all.As long as you don't have the Graf Custom footbeds in the skates while they're in the oven.Update time. I've been using the skates for a few weeks now and have had a lot of ice time. The skates are incredibly comfortable and feel great for the entire time I am on the ice. I have had no blisters, pain, or discomfort of any kind. This is a new concept for me. I have two very different size feet along with unusually high arches coupled with a wide foot and extremely deep instep. Needless to say a custom skate was really my only option for a well fitting skate. These skates have answered my prayers. I had some Graf custom insoles fitted on Friday at West Side Skate and Stick in NYC. They made the skates even more comfortable. The only negative I could find so far with these skates is that I had to have the T-blades re-riveted due to the wrong rivets being used initially. I was told by the gentleman that did my custom footbeds that the rivets used were much too long. No problem really and was only a $15.00 service. I highly recommend the custom footbeds by the way. Really amazing. I guess the only remaining issue with these skates is the durability, but I guess time will tell on that front. If anyone has any questions please let me know.Did you notice that the Graf custom insoles take up much less volume in the forefoot area than the thicker VH footbeds? How did you deal with that?Do you leave the red layer from the VH insole under the Graf custom insole?Did you re-mold the skates for the Graf insoles? Edited October 9, 2013 by Larry54 Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted October 9, 2013 As long as you don't have the Graf Custom footbeds in the skates while they're in the oven.Did you notice that the Graf custom insoles take up much less volume in the forefoot area than the thicker VH footbeds? How did you deal with that?Do you leave the red layer from the VH insole under the Graf custom insole?Did you re-mold the skates for the Graf insoles?The Graf insoles take up a little less volume than the VH insoles. I have the custom pro hockey version. These are a little thicker than the custom hockey version. I took the red and yellow VH insoles out and replaced with the Graf insoles.I didn't re-mold the skates for the Graf insoles. Quote Share this post Link to post Share on other sites
retroXvertigo 4 Report post Posted October 9, 2013 My order has been placed! :-D Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted October 9, 2013 My order has been placed! :-DCongrats! What type of holder are you going with? Quote Share this post Link to post Share on other sites
retroXvertigo 4 Report post Posted October 9, 2013 one100 cowlings. Quote Share this post Link to post Share on other sites
romdj 26 Report post Posted October 9, 2013 I have been using T-Blades since 2001 and they have always made my skates lighter but these skates are a whole new level of light. I have my old Graf 705's and Graf Ultra G5's on hand still. I will have to do a weight comparison.aren't T blades super expensive in the long run because of the replacement steel? I was interested last year because it's hard to get a good sharpener in my area, but the prices of replacements made me stick to a regular setup Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted October 9, 2013 aren't T blades super expensive in the long run because of the replacement steel? I was interested last year because it's hard to get a good sharpener in my area, but the prices of replacements made me stick to a regular setupIf you factor in that the T-Blade runners last much longer than a sharpening does, then the cost is not prohibitive. I used to get my skates sharpened once a week. Now I will go at least a month before changing my runners. For me the most important factor was the consistency of the hollow. Quote Share this post Link to post Share on other sites
jlp15 13 Report post Posted October 10, 2013 kadayo. Love your set up bud I'm doing the same thing! Not to often you see another T-blade user out there. I love em. Only thing sharp enough for me. 1 Quote Share this post Link to post Share on other sites
jbatafuco 6 Report post Posted October 10, 2013 If you factor in that the T-Blade runners last much longer than a sharpening does, then the cost is not prohibitive. I used to get my skates sharpened once a week. Now I will go at least a month before changing my runners. For me the most important factor was the consistency of the hollow.Get blackedge steel and you can go about a half a year without a sharpening Quote Share this post Link to post Share on other sites
kadayo 9 Report post Posted October 10, 2013 Get blackedge steel and you can go about a half a year without a sharpening I guess it all depends on how much you play and if you can get a good sharpening. I never had any luck in my area getting a consistent hollow on my blades.kadayo. Love your set up bud I'm doing the same thing! Not to often you see another T-blade user out there. I love em. Only thing sharp enough for me. You won't be sorry. What hollow do you use? I use 11mm. Quote Share this post Link to post Share on other sites
jlp15 13 Report post Posted October 10, 2013 I guess it all depends on how much you play and if you can get a good sharpening. I never had any luck in my area getting a consistent hollow on my blades.You won't be sorry. What hollow do you use? I use 11mm.S-11-288's. I have the same problem nobody in my area can sharpen on a consistent basis. Went to T-blades for consistency. Quote Share this post Link to post Share on other sites