Leaderboard

Wouldn't it be off by 4.5mm since the rear tower should be 4.5mm more toward the rear and the front tower 4.5mm toward the front to have the 9mm longer holder centered fore and aft?

The tower designs are different. CCM's plate goes further back, and the Tuuk's front goes further up.

Yes, the Alkali adult sizes use all 80mm wheels. There is no wheel that will work well on both asphalt and Sport Court. You'll ruin Sport Court wheels on asphalt (they'll wear down really quickly) and any wheels meant for asphalt will be too slippery for Sport Court. I'd just get some super cheap outdoor wheels for skating in the driveway along with some cheap bearings. For Sport Court, Yellow Labeda Grippers are a good budget option or if you want the best wheels I'd recommend Konixx Pure's (+2 hardness for someone your size). I would get a second set of cheap bearings and a second set of spacers for the Sport Court wheels; it makes changing over from asphalt to Sport Court wheels much faster (you should be able to make the swap in less than 10 minutes if you don't have to change the bearings and spacers). These should be the axles you need if your boots didn't come with them: https://www.inlinewarehouse.com/Alkali_Roller_Hockey_Wheel_Axles_/descpage-ALWA.html These would be the spacers: https://www.inlinewarehouse.com/Alkali_Hockey_Bearing_Spacers/descpage-ABSP.html

If the shop in question did the work and are saying that other shops and online communities are clueless, they deserve to get put on blast if they're owning up to that mount. Experiences with businesses, good or bad, should be shared. Perhaps the MSH member who got this done will chime in.

It's a conflict of interest since I also own a shop as well. If the customer, who is also a ModSquad member, wants to share the shopping he can. I won't though.