Pro stock mission blades

[The Stranger 0]

The curve perfect, but it's a brick.

[Stampede#11 0]

Is it really thick? I had 2 of the Shanny blades on Monkey and now need some more ... Wish I'd just ordered every one they had in the first place.

[LkptTiger 1]

FTW: I just got off the phone with Monkey and the Brennans I ordered were out of stock (shitty). The broad told me that there were 55 of the 01-003s left (well, 48 now). I pray to the Hockey Gods they're all the watered-down YPs that were posted earlier. If not, I'll post pictures (after throwing a fit).

[AnthonyJTa 0]

FTW: I just got off the phone with Monkey and the Brennans I ordered were out of stock (shitty). The broad told me that there were 55 of the 01-003s left (well, 48 now). I pray to the Hockey Gods they're all the watered-down YPs that were posted earlier. If not, I'll post pictures (after throwing a fit).

Yeah, I ordered some Parise's online over a week ago. I noticed my order was "on hold" for 6 days... so I called them, they were out. So I asked some questions in regards to suitable replacements, and the chick had no clue what I was talking about. I just cancelled the order... I may, or may not throw another one in at a later date. I just want something as close to a Sakic clone as I can... and with those vids on the site, god only knows... what I do know is, I feel like an idiot holding my sticks upside down to properly match Monkey's angle.

[Taki27 0]

Has anyone bought any of these blades lately? If so, do any of the righty blades left have a medium or long taper, as opposed to the more common short taper?

[Dman33 0]

is the 01-008 a drury clone? sorry to bring this back up again

[vitaminZ 0]

you better call them to see if they have any instock at all after this long

I wouldnt be surprised if they were actually out

[Invert 13]

So I ordered a Mystery Curve and an Umberger for my Christian Torch shafts that I got on clearance. I was really suprised with the mystery curve, it was an exact clone of my One90 P91. The Umberger on the other hand… well it looks like a blade that has been used on concrete for a summer being thin as can be.

Mystery Curve:

Mystery Curve #1

Mystery Curve #2

Mystery Curve+ P91

Umberger:

Umberger #1

Umberger #2

[simnorm 2]

just ordered 2 RH mystery curves

Shipping to Canada, I expect to pay an extra 7$ for brokerage...

I'll update once I get them

[V3T3R4N3DSN1P3R 0]

is there any sakic or lindrosish curves in left hand 4.5 to 5.5 lie. I really want this in either the mission tapered or dolo blades. Also i want the cuve to be not tht open (i have a problem shooting over the net with a naslund) thanks

[V3T3R4N3DSN1P3R 0]

Does any one know of some of these curves in lefty in a sakic pattern a litttle less open...also are these blades going to be to stiff for someone that is 125lbs. and 5 6..thanks

[Jarick 5]

I have a Brunette pro stock, which seems similar to the P14 with maybe less curve. It's like the Sakic but with less curve and loft, a bit shorter blade (both length and height).

Oh and does anyone know if there are any deeper toe curves in LH?

[interpathway 9]

is the 01-008 a drury clone? sorry to bring this back up again

Yes. I ordered two a month ago. Really great blades if you like the Drury.

[westcoastsniper 0]

it seems the blades are made out of wood, so it would make sense that if you are putting them in your tapered shaft, you would be able to give a little curve with the heat gun, which you should be using to put the blade into shaft anyway, and there you go custom blades!

[Law Goalie 147]

Depends on the wrap.

[V3T3R4N3DSN1P3R 0]

Are there any Kovalchuk looking toe curves in lefty for either these mission prostock blades or the warrior dolomite pro stock blades??

[Hooah4 12]

I have a Brunette pro stock, which seems similar to the P14 with maybe less curve. It's like the Sakic but with less curve and loft, a bit shorter blade (both length and height).

Oh and does anyone know if there are any deeper toe curves in LH?

I just ordered two as I have a Brunette SL sitting around and used it this weekend. Love the curve. How do you like it so far?

Have 2 Redden tapered's also, tried but the rocker/lie is too much for me.

[Jarick 5]

It's great, seems to have a good feel for the puck, kind of a flatter curve.

What are those Reddens all about?

[simnorm 2]

Mission Tapered No Finish

Did you guys find that adding a clear coat (or two) added more durability to those blades?

I've got 2 blades on the way and an old can of polyurethane lying around in the basement.

[simnorm 2]

As promised, here's my update.

Got the Mission composite blades today. UPS fees: 22.50$ca for 2 blades that were 10$us each. :o

Next time, I'm having stuff shipped to my in-laws in NYC.

Here's a pic of the first one, looks like a TPS Nash pattern to me but I'm no expert

Sticker said Mission RB PRO 06 TPR 001 R

2nd one is very odd, and very opened at the toe and shorter. It had no sticker on it.

Here's a pick of them drying after the 1st coat

http://pages.infinit.net/decadent/hockey/FirstCoat.JPG

[westcoastsniper 0]

yikes, yeah I've really noticed that ups screws you on the brokerage fees coming into canada. free trade agreement in a capitalist society just means the little guy gets screwed again.

[mack 44]

Enough with the pissing and moaning because that's far less than I'd pay for simple shipping from those guys.

BTW #2 is a beaut.

[westcoastsniper 0]

Enough with the pissing and moaning because that's far less than I'd pay for simple shipping from those guys.

BTW #2 is a beaut.

I would happily pay that shipping up front, it's only when it comes out of nowhere to bite you in the ass when you thought you got a good deal.

[mack 44]

I don't think it's any better either way. At least there's a chance it could be lower (well, even higher maybe) but I'm flat out screwed on anything. People seem to avoid using USPS and it's pretty damned annoying but I reckon that's the price to pay for living here.

[Jarick 5]

Anyone try the Davison, Whitfield, or 01-001?