Your current equipment

[HDragons73 0]

Skates: Vapor XX

Shin: Easton UL

Pants: Easton Air

Jock: yellow itech one

Shoulder: CCM 652? the blue ones from a couple years back

Elbows: some nice itechs i think their top of itechs line

Neckguard (because we have to): Itech

Helmet: Bauer 5000

Cage: Jofa chrome

Stick: Synergy, 85 flex, Shanahan

Gloves: Easton Ultra Lite

Edited September 15, 2004 by HDragons73

[ngh 0]

Helmet- Nike0004

Shoulder Pads- Some old DR's

Elbow Pads-Nike V-10

Shin Guards- Jofa 9060

Gloves-Bauer Vapor XV

Pants-Easton Synergy

Skates-Mission s400

Sticks-Xn10,VaporXX,M-1,Silver Synergy

Jock-Itech

[Kobe 0]

Helmet: Bauer 4000. Only helmet that fit my head at the time of purchase. I'm probably going to get one of the newer helmets soon though.

Visor: Itech HLC. It's alright. It gets pretty low on my face so it's pretty good since I don't wear a mouth guard. Vision is ok but not great.

Shoulders: old school Coopers. I need maximum mobility so these old school type shoulder pads are the only ones that work for me.

Elbows: Jofa 8025s. I can't stand bicep protectors. These are light and mobile.

Pants: Tackla 4000s (SMU). Basically the 5000s without leg zippers. A steal at $100 cdn.

Shins: Bauer 1000s. Good enough.

Skates: Bauer Vapor 10s. There's a reason why guys like Naslund and Blake stay with these skates.

Shaft: 8-5 Bio Mission Flyweight. I started using this while I was waiting for my 10-7 meta flyweight to arrive (to replace the one that I broke) and I've been on a 11 game scoring streak since. It's still probably the lightest tapered shaft on the market next to the r2xn10. Durability and performance is excellent.

Blade: Pro stock composite inno/easton (they're completely unmarked) long hosel tapered blade. Easily the best blade that I've ever tried. Very stiff and very durable. I bought 3 of them and I'm still on my first one after about 4 months of use.

Gloves: Bauer XV. Most comfortable glove I've ever tried. Fits tight on the back of the hand and has a very mobile wrist area. Fantastically priced as well. Best retail glove currently on the market right now imo.

[thunderbirds_are_go 0]

Ice Gear:

Helmet: Jofa 690 with Z-Leader Aviator cut half visor - most comfortable helmet I've tried. Visor is OK, but not great.

Shoulders: none

Elbow Pads: Jofa 8066 - excellent protection, but maybe a little to bulky

Shin Pads: Jofa 8090's - again, excellent protection, but why can't they add another strap?

Gloves: CCM 852's - I like them a lot

Shorts: Bauer shorts with Nike ticks. Don't know what they are.

Skates: Vector Pro's

Sticks: Mission M1, but I prefer my Vector shaft with CCM 1052 blade

Inline Gear:

Helmet: Jofa 690

Elbows: CCM 852 (last year's blue ones) - great elbow pads - very comfortable, good protection, dry out quickly. Like them better than my Jofa 8066's.

Shins: CCM 852 (last year's again) - very comfortable, but not as protective as my Jofa's.

Gloves: CCM 852's

Girdle: bilt-rite works girdle - great protection, but a bit bulky. Like the wrap around system though.

Pants: Hyper Steel (2003 model) - light, but falling apart easily. Best pants were the old straight black CCM Edge 4.3 pants. Syven 501's OK, but a bit heavy.

Skates: CCM Mavericks - serving me well. Might look at the new Heliums or the Vector inlines next year, but these are holding up well

Sticks: Vector shaft with 1052 blade, Tri-flex shaft with Franklin 9006 blade. Prefer the Vector slightly, but it could just be the blade.

[Keith 0]

Helmet-Jofa 390

Gloves-Bauer Vapor XX

Sticks-Tanabe xn10, Christian Diamondlite 110, Novius 260 w/inno schneider

Skates-purefly w/tuuk+, Rebellion 5500 w/3d blades as backups

Shoulder pads-03 Z-air

Elbow-Jofa 5044

Shin-Bauer Vapor 10

Pants-Bauer Vapor 6

[MoCorleone 0]

Helmet: Itech HC95

Visor: Itech Pro Wave

Shoulders: Easton Synergy's

Elbows: Jofa 8035

Pants: old pair of Kohos

GlovesEaston Pro Stock Air's (nylon)* the lightest, less restrictive gloves i've used

Skates: 2004 Easton Z-Air Comps

Stick: Easton Stealth, Derek Morris Pro Stock Stick *by far my favorite stick ever

[Jim Bob 0]

Helmet- Bauer 5000 w/ Itech Cage

Shoulder Pads- Some old Vics

Elbow Pads-Some old Jofas

Shin Guards- Easton Z-Air

Gloves-Bauer Vapor 10

Pants-Bauer 5000

Skates-2003 Mission PureFlys

Sticks-Inno 4000 w/ Inno Blade & Easton UltraLite w/ Inno Blade

Jock-Itech

Edited October 12, 2004 by Jim Bob

[Kovy_Ribs_Fedo 3]

Blade: Pro stock composite inno/easton (they're completely unmarked) long hosel tapered blade. Easily the best blade that I've ever tried. Very stiff and very durable. I bought 3 of them and I'm still on my first one after about 4 months of use.

That's nice for you Kobe...I wish I will keep my blades that long.

[Aggie 9]

Helmet: Bauer 5000 with Bauer FM 4000 cage

Shoulder Pads: Easton classics

Elbow Pads: Franklin 9655

Shin Guards: Easton Ultra Lite Gold

Pants: Franklin 9805 girdle with shell (ice) or Mission Apex pants (roller)

Skates: Mission S500 (ice) or Nike Roller Daddy (roller)

Gloves: Rebellion 5000, Muskoka 950's

Sticks: Inno Sundin Novius, TPS P31 Response, TPS P19 XN10, TPS XN10 Redlight with Drury Z-Carb, Easton Hull Ultralite with Drury Z-Carb

[wristshot19 0]

Helmet - Jofa 690

Visor - Itech HX50

Elbow Pads - Some older CCM with neoprene to hold them in place. Model number has been worn away so don't know what model they were.

Shoulder Pads - Sher-Wood 5030 Tradition

Pants - Sher-Wood 7500 from about 8 years ago. They will have to pry these things from my cold dead hands.

Shin Pads - Hespeler Classics - Built like tanks with a lot of movement

Gloves - CB Nylon Mission M-1 Pros

Skates - Nike V12

Sticks - Hespeler Alpha Nem. and Jofa 8045 (Soon to be another Hesp when I can get up to see JR).

[atomicpunk5150 2]

Helmet: Bauer 5000

Visor: None

SP: Jofa 8400

EP: Jofa 6044

Pants: Easton Air

SG: Easton Air

Gloves: TPS HGT

Skates: Nike V12

Stick: Inno Nov 300 Kov/XN10 W Nash

Edited September 15, 2004 by atomicpunk5150

[koivulchuk 1]

Helmet: a cracked tour lexur 700 cheapy from hockeygiant

Shoulders: none for roller, bauer 5000 for ice

Elbows: Bauer 500...cheap & small

Gloves: Eagle x70's...very comfortable...lately i've been wearing some easton z-airs - unbelievably light...

Girdle - Mission... something...blue/black/grey from 2 yrs ago...

Pants - Missions for roller, some old Koho's for ice

Shins - Hespeler 5000 for roller, Jofa 6090 for ice

Skates - Mission vsi w/ '01 generator frame... ice - bauer 7000's

Sticks - vapor x shaft w/ inno mccarty, tri-core w/ allison rtm, hespeler patriot tapered w/ inno federov

[mmhky_11 0]

Skates: Bauer Vapor XXX

Shin: Bauer Vapor 10

Pants: Tackla 5000 Air (Phoenix Coyotes Pro Stock)

Shoulder: Bauer Vapor 10

Elbows: Jofa 9044

Helmet: Bauer 5000

Cage: Black Jofa 480

Stick: Easton Synergy Si-core, TPS Triton OPS, Innovative 1100 shaft w/ synth. comp. blade, Bauer Vapor XX OPS, Pro Stock Synergy

Gloves: Eagle CP94

Edited May 20, 2005 by AAA_Hockey

[Squirrel 0]

Skates: CCM Vector Pro

Shins: CCM Pro

Pants: CCM 852

Shoulder: Mission Warp Zero

Elbow: CCM Pro

Helmet: Bauer 5000

Sticks: CCM V120c

v120t

v110

TPS Response Plus

[chihawks24 0]

Skates: Vapor 10's with black custom+ holders

Shins: bauer 8000

Pants Talkla 9000

Shoulder Bauer Sp 3000 jr pads Had them since pee wee.

Elbow jofa JDP 6044

Helmet: Bauer 5000/ Rusty dented tru vision cage.

Jock Itech

Sticks: inno 1100/ kovlev blade, Cut off Responce/ drury Synth.

Gloves Eagle X80 w/ goatskin palms

[falcons5419 0]

Helmet-bauer 5000

Skates- Mission pures 400

Shins,shoulders,elbows-Nike V12

Gloves-RWB Eagle X81

Pants-Mission M1

Sticks-TPS XN10,Mission L-2,Synergy Grip

[troy 12]

Helmet- Bauer 5000, forced to get it after 4 concussions

Cage - Bauer truvision 4000

Shoulders- V-12's, it like they're not even there i love 'em

Elbows- CCM 652's

Gloves- XX's, honestly the best money i ever spent on hockey equipment

Pants- MBP 8 girdle, protective & light

Shins- V-12's, haven't had one bruise on my leg since i got them

Skates- S500's, took awhile getting used to the supplefit system, but now they're probably in my top 3 skates that ive used

Stick- TPS RLXN10 whip flex with a Nash PTC blade, a rocket launcher

[bubber27 0]

Helmet/Visor - Bauer HH4000 w/ Itech RBE IV half shield (want to get an Oakley Straight Small)

Shoulders - none

Elbows - Nike V10's

Gloves - TPS HGT's and Nike Ignite 1, both prospec

Pants - M1, best pant i've had, best bang for buck too

Shins - older Vapor 4's, they're tanks but stink bad

Skates - older Supreme 3000's, want 7000s next

Sticks - Rubber Response Reg Morrow, Rubber Response Reg Nash, Synergy McCabe, Novius w/ Lidstrom Z-Carb, Vapor XV with cut down Lidstrom T-Flex, UltraLite with Pronger 1000 woodie (I love heel wedges)

Jock - Bike baseball cup (best cup you can buy)

Under gear - Nike Dri-Fit tee, UA HeatGear leggings

Peace

Phil

[thejackal 46]

Skates: CCM Tacks 552, Mission S300 (using both about the same right now)

sticks: inno 1100 5/300 with inno pro hull blade

M-2 85 flex with TPS genesis pro blade, same curve

ballistik ultralight with unknown CCM 1052 blade (modo clone that i tweaked)

Easton aluminum i found in a trash can for street :D

shins, shoulder pad: Bauer 300

elbows: old model koho (2245)

helmet: jofa 690 combo

jock: CCM

neckguard: itech

gloves: hespeler fat cuffs

[Edge 0]

HELMET: Bauer 8000 black: Best helmet out right now imo. Great adjustability, 3 ways. Comfortable, looks great to me.

CAGE: Jofa 480 Black: Best vision and looks the best.

CHIN CUP: Bauer 8000 Dri-Fit chin cup, comfy, stays dry.

SHOULDERS: Itech 775 THG. Very protective, but are still lightweight, and fairly low profile. Seem to be holding up very well too.

ELBOWS:Nike THG ProSTK Elbows(between v10s and v12s), Awesome mobility, they stay put with that grippy printing, comfortable, and protective.

SHINS: Bauer 8000. Unbelievable pads. Removable inner pad, very comfortable and cushy on the inside. Great calf protection, Wrap around strap on top to make them as tight as you want, as well as a pad on that top strap to keep the strap from digging into your leg. A little bulky for some, but i don't mind. They have good protection.

PANTS: Easton 04 Air. Used Air pants for a while now and still love them. Good mobility. Have a nice lower back protection with the Gen 4 air pad thing. Awesome BioDri liner too. Comfortable, and i like the twobelts on them, instead of one.

GLOVES:Bauer Vapor XX. XXs are great off the shelf, nearly no break in time. They have great protection, arent' too heavy, and are very flexible. You can adjust the cuff also to be tighter or very loose. flexible fingers too.

SKATES: Vapor XXs with nonperfed steel. Bauer 8090s to come if XXXs aren't anything special. XXs are nice, but the 8090 fits my foot a little better. They hold up longer than XXs, and are a tad lighter. I've heard great things on them.

UNDERGEAR: Underarmour loosegear longsleeve black. Underarmour socks, and I hope to get the Shockdoctor loose jock system soon.

Mouthguard: Edge mouthguard

Edited October 8, 2004 by Edge

[joshy207 15]

-Helmet... Itech HC95. Very comfortable, good look, great fit.

-Cage... Itech 909 RBE IX. This one never hit the market, it didn't get HECC certified. A real shame, because in today's "light, light, light" market mentality, this cage would be TOPS. It's all titanium, about 40% to 50% of the weight of a traditional steel cage. Grey titanium finish (like a Bauer TruVision). The only drawback is that it's the same shape as the Itech 907 cage, the rounded one.

-Shoulders... Cooper SB90. From the 80s, the just-add-water variety. Virtually no padding, except for the exposed-plastic shoulder caps and some bicep protection. Otherwise, they're lightweight, very low-density foam.

-Elbows... Vic Gold 105. Again, ancient by today's standards. Light, fairly small, traditional donut-style elbow with small slashguards. They're falling apart though, likely to be replaced by Sherwood 5030s or CCM 852s.

-Gloves... Winnwell BDP. They weren't on the market for a year before Winnwell went tits-up. A shame, because these gloves are awesome. Eagle-like mobility, wide open cuff, good nash palm, higher density foam, and plastic inserts.

-Pants... Hespeler Pro Lite. Great pants, solid protection with good mobility. High denier nylon, not going to rip and fray so easily. Thigh zippers are a big plus.

-Shins... Itech Techlite 855. 1999 model. Anatomic design, CoolMax liner, good calf wraparounds. I cut off the straps and I use Itech's "ITape" neoprene shin straps. They're GREAT. Hold the pads perfectly in place.

-Skates... Flite Summit. An older model, circa 1996. They're close to the old Bauer 3000s in quality. They've held up pretty well, but I missed 2 years with injuries and used a pair of pro CCM 952s for a couple years, and I'm not all that hard on my skates. The Flites have been a pleasant surprise, I had to order them when Bauer was out of stock in EVERY SKATE in my size back in '96. I mounted Tuuks on them and have had very few problems, other than having to stretch the length and width a couple times.

-Undergarments... either a Protex PTX or Augusta Sportswear CoolMax t-shirt and an Itech Jock Pro (the maroon one). Moisture-wicking tees are nice, I do notice a difference during and after the game. The jocks are nice too, they've always worked well for me and I like the Pro model with the sewn-in brief.

-Shafts... I currently have 4. An Innovative 1100 tapered, formerly a Larionov OPS; a Mission Flyweight Ether tapered; a Louisville TriCore (non-pro radius); and an Easton Z-Bubble, green, original year model. The Bubble is my oldest shaft, and has been good to me. Like I said, it's from the first year (1997?) and has held up like a champ, but I'm not too tough on my sticks either. The TriCore is a TANK, I heard NCAA guys weren't breaking them when they first came out, and it's got great feel for a shaft. The Flyweight and the Inno are both great shafts too, I like the tapered effect and both have good feel and balance. The Inno has the slight grip on it, which I like.

-Blades... various wood, straight heel curves with open toes. Closest retail patterns are old Easton Thornton and old Louisville Antropov. I've also come across a bunch of pro blades that I like too. Gotta be wood though.

[Miseaujeu 291]

Helmet: Mission Carbster Pro Green

Gloves: Hespeler Classic Pro "Weight" Knit // Mission Pro Knit "Gratton"

Elbow: Mission M1

Shin: Hespeler GX300

Skates: S300 w/ Black Pitch holder // Mission D1c with Prototype Mg Frame

Girdle: Bauer MBP

Shoulder: Hespeler Vintage

Sticks: Hespeler Alpha Prototype/Mission Hex prototype/Mission L2 Pro

[EricG. 0]

Helmet/Visor - Bauer 8000 w/ Itech RBE III chrome (most comfortable helmet I've ever worn), Itech HC100/CCM 1052 w/ Itech straight cut.

Shoulders - Bauer 8000 lightspeed (very light).

Elbows - Jofa 9066 (I like the bulky fit).

Gloves - Mission Helium H750 (silver/white), (they weight nothing, dry quickly, and fit me well).

Pants - Franklin 9880 pro pants (I like the weight, I like the fit and they're very protective).

Shins - Jofa 8090 (only shin pad I'll wear).

Skates - Vector Pro (stiffness and weight are nice), Graf 735 (weight and comfort).

Sticks - Malakhov Si-Core Grip, Corson XN10, Kovy Commander w/ montreal wood. Hopefully will have a stealth soon.

Jock - Under Armour hockey jock.

Under gear - Under Armour loose long sleeve shit, Under Armour turf long sleeve, Under Armour turf long pants. (All black).

[sikocycles 1]

Skates Ccm Pro tacks deciding on something new

Glove Mission M1, Bauer vapor 10. Louisville hg1 nylon pro stock

Helmet Bauer 4000 I want a 8000 but it is to small for my head Please make a XL

Elbow Jofa 9066

Shoulder Easton ultra lites

Pants Bauer pro stock Islanders pant, bauer girdle, Wild pro stock nike pant and a few others from ebay

Shins Jofa 7500 17†want 18†but lhs did not have them

Baseball cup

Sticks Vapor XX by far my favorite, Easton synergy, XN10, Montreal nitro,

[Kovy_Ribs_Fedo 3]

Hey guys, I have received my Fedorov gloves Friday. They are awesome. :)