Santos L Halper 90 Report post Posted October 31, 2018 4 minutes ago, YesLanges said: Hopefully, they're just wrong about that. Any chance he'd redo the test after letting you do his normal profile on them? He's currently working with the folks from Marsblade to try to dial all of that in. Aside from making sure that he has a sharpen that he's happy with, I kinda need to stay out of it. Also, I don't profile skates....😉 Share this post Link to post Share on other sites
Vet88 674 Report post Posted October 31, 2018 Hmm, all this just to get a ex NHL player to feel comfortable in them, someone who has skated for most of his life. How are they going to dial in the rest of skating population??? 1 Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted October 31, 2018 People should stop wasting time with all of the gimmick stuff and just use Flare steel. Biggest change I have ever made in my life when it comes to tinkering with equipment. Just waiting for the new CCM holders to go GA and for Flare to be released for them and I'll be set for the future. Need to get these Tuuks off my Trues ASAP. Share this post Link to post Share on other sites
Sniper9 559 Report post Posted November 2, 2018 On 10/31/2018 at 4:47 PM, Nicholas G said: People should stop wasting time with all of the gimmick stuff and just use Flare steel. Biggest change I have ever made in my life when it comes to tinkering with equipment. Just waiting for the new CCM holders to go GA and for Flare to be released for them and I'll be set for the future. Need to get these Tuuks off my Trues ASAP. How come u didn't put the SB 4.0 on instead of the tuuk edge Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted November 2, 2018 (edited) 1 hour ago, Sniper9 said: How come u didn't put the SB 4.0 on instead of the tuuk edge Hate those stupid bolts. Too many times have I lost them when changing out steel on the bench. I wish Flare would make steel for the VH/True holder. I really love that holder. It's incredibly stiff and rigid. Edited November 2, 2018 by Nicholas G Share this post Link to post Share on other sites
Sniper9 559 Report post Posted November 3, 2018 (edited) 1 hour ago, Nicholas G said: Hate those stupid bolts. Too many times have I lost them when changing out steel on the bench. I wish Flare would make steel for the VH/True holder. I really love that holder. It's incredibly stiff and rigid. The true holder is stiff. One of my regrets was swapping it out for the edge. I now have the ls2 holders now which I love, but in the future, when I get another pair of trues I'll stay with the stock holder. Did you swap out the true holder for the quick release? The single bolt in the back isn't that much more inconvenient, esp for rec hockey. I don't carry spare steel with me so the quick release idea is pointless to me anyways, esp when steel doesn't always fit properly on the edge holders. Nvm re read that you swapped to be able to use the he flare steel. Edited November 3, 2018 by Sniper9 Share this post Link to post Share on other sites
JR Boucicaut 3816 Report post Posted November 10, 2018 Back on topic, which is the Marsblade holder. Share this post Link to post Share on other sites
ViperRy 8 Report post Posted November 13, 2018 Wouldn't more blade on the ice make him faster or glide better with the Mars? Less agile, I understand that. Share this post Link to post Share on other sites
YesLanges 128 Report post Posted January 14, 2019 On 10/31/2018 at 3:37 PM, Santos L Halper said: I will ask my friend what 'adjustments' Marsblade makes and see if he was able to gain any insight. Any update on this, Santos? Share this post Link to post Share on other sites
Giltis 117 Report post Posted January 14, 2019 Marsblade has made it into the NHL it seems like. 1 Share this post Link to post Share on other sites
JR Boucicaut 3816 Report post Posted January 14, 2019 Kronwall started to wear them in preseason. Share this post Link to post Share on other sites
ricepow 14 Report post Posted January 20, 2019 Came across these last week on Kick Start. Looked interesting.... Have to sit back and see where these go. Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 10, 2019 We started to get people bringing them into the shop for installation this week. These things are difficult to mount and the holder weighs a ton and has zero flex in it. I weighed a size 272 holder and it comes in at 394 grams. The factory VH holder with STEP steel is about 100-120 grams lighter. A TUUK LS Edges with Byonic steel is about 150 grams lighter. Based on how rigid the holder is I fear it will break eventually or yank the rivets out of the boot. I guess we will see in time. I mounted three pairs over this last week. Share this post Link to post Share on other sites
mojo122 541 Report post Posted February 10, 2019 Have no interest in these holders, but from a shop perspective do the holes line up with LS Edge or SB 4.0? Weight significance and no choice of steel are 2 major turn offs. Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 10, 2019 4 minutes ago, mojo122 said: Have no interest in these holders, but from a shop perspective do the holes line up with LS Edge or SB 4.0? Weight significance and no choice of steel are 2 major turn offs. They mostly line up.... But they are a nightmare to mount since they are carbon and have zero flex. 1 Share this post Link to post Share on other sites
JR Boucicaut 3816 Report post Posted February 14, 2019 Spoke to Per - he's going to send me a set next week. Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 14, 2019 1 minute ago, JR Boucicaut said: Spoke to Per - he's going to send me a set next week. Can you ask him the specific profile they are applying to the steel? It doesn't seem to be a standard single radius 10' since when I check it with the ProSharp profile checker I get different results at different areas of the blade. It actually seems like it might be a dual radius profile. Share this post Link to post Share on other sites
KevinL 0 Report post Posted February 15, 2019 In the booklet that comes with the holders, it states that it comes with an 11' profile. Pitch is neutral. Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 15, 2019 1 hour ago, KevinL said: In the booklet that comes with the holders, it states that it comes with an 11' profile. Pitch is neutral. Interesting. That explains why so many people are asking me to profile them. Share this post Link to post Share on other sites
YesLanges 128 Report post Posted February 16, 2019 Mine are currently being mounted. Any idea what profile to go with compared to current profile on standard steels? I normally shave heels and toes and have a dual 8'/13' radius with an aggressive forward pitch and 95/1 FBV. Share this post Link to post Share on other sites
KevinL 0 Report post Posted February 16, 2019 17 hours ago, YesLanges said: Mine are currently being mounted. Any idea what profile to go with compared to current profile on standard steels? I normally shave heels and toes and have a dual 8'/13' radius with an aggressive forward pitch and 95/1 FBV. I believe Per (the creator) recommends you use whatever profile you're used to. Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 16, 2019 2 hours ago, KevinL said: I believe Per (the creator) recommends you use whatever profile you're used to. We tried that and its not the case. The Marsblade holders dont have the same aggressive height and pitch when compared to VH/TRUE holder, for example. They are very neutral. I also think that since the front is "locked" while the rear of the holder flexes the current profile players are using will likely feel strange. We are seeing players use an aggressive toe with a very long heel. 8-10 in the front and 13-26 in the rear. It all depends on the specific person though and their skating profile. I'll report back as more players provide me with feedback. I am concerned there are no replacement blades available yet as profiling, especially if you go from one extreme to the next, takes off a decent amount of steel every time. Share this post Link to post Share on other sites
cjpritch 62 Report post Posted February 20, 2019 Looks like Tydan will be providing replacement steel Share this post Link to post Share on other sites
JR Boucicaut 3816 Report post Posted February 20, 2019 They make the stock Marsblade steel, so that makes sense. 1 1 Share this post Link to post Share on other sites
VegasHockey 1284 Report post Posted February 25, 2019 Out of the 10 holders I have installed 9 of the players have gone back to their previous holder. Not a lot of positive feedback so far.... What other feedback are others seeing? 2 1 Share this post Link to post Share on other sites
