Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble

shoot_the_goalie

Members+
 View Profile  See their activity

  • Content Count

    730

  • Joined

  • Last visited

  • Days Won

    18

  • Feedback

    0%

Everything posted by shoot_the_goalie

  1. shoot_the_goalie
    It does. Looks like it was an original part, since it matches the hex shape.
  2. shoot_the_goalie
    My tendon rivets popped out again. They were not flared as SkateWorks had previously suggested. Anyway, I ended up taking a helmet screw bolt and the bolt seat from old SB 4.0+ holder screws and was able to attach the tendon guards on that way. Looks good, sits pretty flush, and holding well now after a few skates. Had to open the tendon guard screw holes a tiny bit to accommodate the bolt seat, but nothing that harmed the integrity of the parts. Didn't use Loctite, but if they start to loosen, I'll probably add when re-tightening.
  3. shoot_the_goalie
    I have no idea how my rivets popped off, and quite frankly was very surprised that both of them failed around the same time. One completely popped out and the other, the rivet was still in place, but the burr had popped off. I wear shins over tongues, but do not put my socks over the tendon guard, nor do I tape/lace around the tendon guard, so I imagine I put very little stress on them. I also am very careful not to pull on the tendon guard when handling the skates, taking them off, etc.
  4. shoot_the_goalie
    The closest place I trust with skate repair is 35 mins away, and I have a handheld rivet gun which would work for this issue. With that said, I had time today to go to the shop and they put new copper rivets in at no charge (I bought the skates there). But if a simple issue like this arises again, I would rather not have to drive an hour round trip for a 10 min fix that I can most likely do myself. Not to mention, the guy who does skate repair there, isn't always there. Guy also told me that they've had a bunch of people needing rivets replaced on the True tendon guards, so I wouldn't be surprised if this were to happen again down the line.
  5. shoot_the_goalie
    Cool. Do you know the type and size of rivet I should use?
  6. shoot_the_goalie
    Both of my tendon guards lost their rivets tonight. I'm assuming it's a pretty simple fix to put a new rivet back in there so looking to DIY it using a handheld rivet gun. Does anyone know the type and size of the copper rivet that is used at the tendon? Anything else I should be aware of if DIY?
  7. shoot_the_goalie
    It's been found that pointing the skate toe-right when facing the machine gives better coverage when sharpening the toe of the skate.
  8. shoot_the_goalie
    Wow. $30. That's pricey. Step, sells rubber honing stones for about $13. In fairness, the Step stones are much smaller than these.
  9. shoot_the_goalie
    Those skate graphics kinda remind me of the Micron Mega 10-90's of yesteryear. (with the white plastic "power" clips)
  10. shoot_the_goalie
    Yes. Blue Loctite them. Doesn't take much effort.
  11. shoot_the_goalie
    I have the Gladiator socks. They're well made and I like that there's no logo on them, but they are pretty thick, as well as warmer and heavier than your typical mesh sock. I pretty much only wear them if I'm playing outside.
  12. shoot_the_goalie
    I wonder if this might come to fruition. Total speculation, but I noticed that VH does sell retail junior boots. Maybe down the road, they'll do this with senior sizes? https://www.icewarehouse.com/True_Stock/descpage-TJISK.html
  13. shoot_the_goalie
    SB 4.0 holders also have a more aggressive forward pitch than Tuuks in general.
  14. shoot_the_goalie
    Well, mine is a X01, but regardless, I agree with you. Most people would never be able to tell the quality difference from which machine you sharpen (if sharpens are done properly). And for me, the speed, ease, & convenience of the Sparx outweighs the negligible improved sharpening quality on the Blackstone.
  15. shoot_the_goalie
    I still find that I produce better sharpens with my Blackstone, but I'm almost fully converted to my Sparx now for just the sheer convenience factor (sharpening multiple skates in the house).
  16. shoot_the_goalie
    I have a similar condition playing tennis where I feel one of my knees are going to give out (feels unstable). I do wear a patella strap (pretty tightly) to help with this. I use the McDavid brand. However, for hockey, I don't get the same feeling in my knee since there's less torquing of the knee joint (unlike in tennis), so when playing hockey I just wear a tight compression knee sleeve to help. I would imagine a patella strap would be a little bulky under the shinguard.
  17. shoot_the_goalie
    Can you post a pic?
  18. shoot_the_goalie
    Actually, from what I've seen and heard, VH skates had many more issues with the tracing method, cause there was much more room for error. I know a few guys who's VH skates were too big cause they screwed up the trace. Some of those guys, then got Trues and are so much more happier with fit.
  19. shoot_the_goalie
    You can get rubberized stones, which really help de-burring coated steel. Leather just gets the fine grit off, but has a tougher time with larger burrs. I use Step Blacksteel, (which does burr a little on the Sparx, but not with the Blackstone X01). I used the rubber stone, then finish with a rough piece of leather, then a smooth piece of leather.
  20. shoot_the_goalie
    I do not adjust the pitch knob very often. Pretty rare actually. However, I do remember needing to do it on a skate which I suspected either the blade or the holder was misaligned.
  21. shoot_the_goalie
    I’ve spoken directly to Blackstone about the pitch knob and they themselves say there are times where it is inevitable that you have to move the pitch knob, even when the machine is operating properly. They do suggest you adjust it as infrequently as possible though. In my personal experience I have had to adjust the pitch knob in the past depending on skate and holder alignment.
  22. shoot_the_goalie
    That's like every company ever...lol. However, from what I understand, marketing research shows that this is actually an effective thing in selling new product. Psychologically, makes the consumer feel like they're getting a fresh new product with more bells & whistles, vs the next-gen product that, usually, it actually is.
  23. shoot_the_goalie
    There's so many different things that could be coming into play with what you're asking. I'll leave comments on profiling, adjusting holder pitch, etc. to other people on the boards who know much more than me about those things. In regards to Superfeet, I've been a big believer in them, as I've used them in both skates and shoes/sneakers. (I no longer used them in skates now having Trues though). The important thing to note is that Superfeet are not arch support insoles; rather they are heel stabilizers, that align your heel and adjust accordingly. This could be why you're having issues with them. Depending on your anatomy, Superfeet can actually have a negative effect (though in most instances positive effects are achieved). You might be better served with an insole specifically for arch support like Speeplates or the new CCM Orthomoves.
  24. shoot_the_goalie
    I use Fox River liners, but they might be too thin for your liking.
  25. shoot_the_goalie
    It's a moisture resistant, stiff fabric...kinda looks like tightly woven nylon. Not nearly as stiff as the composite materials you see today. Last time I saw it in a retail skate was with the Bauer Nexus 1000.
×
×
  • Create New...