Vishi05 0 Report post Posted March 25, 2009 I'll be getting my one90s back tomorrow or Thursday with the vanguard mag chassis on them... I'll throw some pics up when I get them. Quote Share this post Link to post Share on other sites
Invert 13 Report post Posted March 25, 2009 Should I go black laces?If you can find the ones with blue tracers. Then the answer is, Absolutely. Quote Share this post Link to post Share on other sites
Rick 0 Report post Posted March 25, 2009 Fatwabbit, You certainly have a bunch of sweet looking conversions. How do you decide which ones to skate? Rick Quote Share this post Link to post Share on other sites
Bender 0 Report post Posted March 25, 2009 Bauer Supreme one90 bootTuuk One Up Chassis BSB Swiss BearingsKryptonics Extreme Sticky wheels (white)Labeda Dynasty II wheels Should I go black laces?The kryptonics remind me a bit of those Factory Z wheel on the first Mission Helium line but better as they're more white, let us know how they perform. +1 to what Invert said, if you can get back + blue tracers, definatly Quote Share this post Link to post Share on other sites
Vishi05 0 Report post Posted March 26, 2009 These are replacing my wicked ones and they are a bit tight on my feet even though they are EE width. Hopefully they stretch out a bit. Quote Share this post Link to post Share on other sites
EdgeKid3 0 Report post Posted March 26, 2009 Those look awesome man. Nice Kuzaks hahaha. Solid build though, bet you'll love em. Quote Share this post Link to post Share on other sites
thugnation00 0 Report post Posted March 30, 2009 Not super custom or anything, but I swapped out the original white chassis for some black mag chassis (I already had them sitting around) and added some heel lifts. I also touched up a few spots on the skates to cover up the green and match the red/black scheme Quote Share this post Link to post Share on other sites
meals7 0 Report post Posted March 30, 2009 The black mag looks sharp on the Boss' Quote Share this post Link to post Share on other sites
Vishi05 0 Report post Posted March 30, 2009 Those look awesome man. Nice Kuzaks hahaha. Solid build though, bet you'll love em.What do you know... I lost a huge chunk of one of the Kuzaks last night, guess it's time to put on the other two rink rats I have. Quote Share this post Link to post Share on other sites
k13 0 Report post Posted March 31, 2009 Those look awesome man. Nice Kuzaks hahaha. Solid build though, bet you'll love em.What do you know... I lost a huge chunk of one of the Kuzaks last night, guess it's time to put on the other two rink rats I have.I almost bought those exact wheels too... Good thing i went with a set of labeda grippers! Quote Share this post Link to post Share on other sites
Invert 13 Report post Posted April 3, 2009 Red Star A Frames on a pair of CCM Externo E-50's. I'll probably rip them off when the Vapor 40's start going for a lower price. Quote Share this post Link to post Share on other sites
Clark12 0 Report post Posted April 7, 2009 Probably should have put this in the photoshop thread in the ice forum, but here's what my next pair of skates are gonna be. Got the wheels and chassis ready to mount, just waiting for the skates to arrive... Quote Share this post Link to post Share on other sites
Ray 0 Report post Posted April 7, 2009 Not super custom or anything, but I swapped out the original white chassis for some black mag chassis (I already had them sitting around) and added some heel lifts.How much lift did you add? I am having a buddy machine some 3mm lifts for my grafs with vangauards. I put them next to my Tour Code 1's and the front is higher and the back is lower on the vangauards. I already feel back on my heels with the Tours. I went with 3mm as a guess since I have screws that are about 3mm too long for the t nuts. I have a feeling 3mm will feel like a big difference. If I have to go more I will. Quote Share this post Link to post Share on other sites
thugnation00 0 Report post Posted April 7, 2009 It was about 1/8 of an inch. Not sure what that is in mm but the vanguards feel more like the old hi-los to me now which is what I was going for. Quote Share this post Link to post Share on other sites
Ray 0 Report post Posted April 7, 2009 1/8" is pretty much 3mm...thanks. Quote Share this post Link to post Share on other sites
fatwabbit 93 Report post Posted April 7, 2009 It was about 1/8 of an inch. Not sure what that is in mm but the vanguards feel more like the old hi-los to me now which is what I was going for.what did you use for the heel lifts? Quote Share this post Link to post Share on other sites
Bender 0 Report post Posted April 8, 2009 Probably should have put this in the photoshop thread in the ice forum, but here's what my next pair of skates are gonna be. Got the wheels and chassis ready to mount, just waiting for the skates to arrive...Better hope that they fit correctly, either way they should look pretty good. Quote Share this post Link to post Share on other sites
thugnation00 0 Report post Posted April 8, 2009 For my heel lifts I used some sort of plastic sheeting that, from what I was told, was used as some sort of shims for Graf skates. Quote Share this post Link to post Share on other sites
vinceyuen 0 Report post Posted April 8, 2009 (edited) just got these done today.Supreme Comp Jrs.Tuuk Rocker2x 72mm 74a Mister sticky2x 72mm 74a Red Star GT MXCan't wait to try them out tonight for pre-season game.*edit* okay' ive gave the skates a good run durring the game. I love the rocker so far. I would of got the sprungs if they made a jr size, but for these tuuk rockers i got off ebay brand new for $20, it seemed more then reasonable. The wheels were pretty good too, the rink was pretty dusty and people with rink rats were sliding and falling everywhere. Durability wise, 1 of the mister sticky has started to peel, but i still love them. Edited April 8, 2009 by vinceyuen Quote Share this post Link to post Share on other sites
Bender 0 Report post Posted April 8, 2009 wow it's been ages since I've seen rockers like those! Such a bright colourful skate! Quote Share this post Link to post Share on other sites
Ray 0 Report post Posted April 8, 2009 For my heel lifts I used some sort of plastic sheeting that, from what I was told, was used as some sort of shims for Graf skates.I just installed my 3mm CNC machines aluminum lifts and what a difference. The feeling is very neutral right now. I could probably go a little more since the forward pitch on my RBK ice skates is still WAY more than how my Grafs sit on on the vangaurds, but I will try a few games as is. Quote Share this post Link to post Share on other sites
Brokensticks 0 Report post Posted April 9, 2009 I'm hoping to find 4 more floating spacers before Saturday so I can try these out.Easton Synergy SE16's on Sprung A8's.I got a deal on the Labeda Dynasty's so I thought I'd give them a shot.I chickened out on the conversion with the carbon boot. I didn't want to be the one drilling into it so close to the hole in the bottom. Quote Share this post Link to post Share on other sites
fedorov#91 0 Report post Posted April 9, 2009 ddaammnn! They look really good, i use the same wheels on my sprungs, very grippy. Quote Share this post Link to post Share on other sites
murphtehsmurf 0 Report post Posted April 10, 2009 My first time ever messing around with skates and I think it turned out well :D . I still need to put the rear bolts in because the ones I have are a bit short.Nike Quest 2's on Mission Generator Hi-Lo chassis. Do they look right? Quote Share this post Link to post Share on other sites
McLuvin09 0 Report post Posted April 11, 2009 http://img156.imageshack.us/img156/3241/chrisskate001.jpg Quote Share this post Link to post Share on other sites
