How to order custom Bauer skates

[Fattie 1]

Nice pic that last one. Some of you guys are the lucky ones who live somewhere near where you can really get custom skates. Or good fitting, if you put it that way. After all, that´s all you need. Here in Europe that is very rare if you aren´t professional player. But it is nice to read these writings and learn what is really possible to do if you have the luxury to get well fitted custom skates. I personally would need nexus eyelet lining because of the high instep volume, and apx interior (eee/a) for right fit, and also curve materials, but how is it done in real life? Nexus 1000 heel is really horrible (wide and akward) in my opinion, and the toecap has really generous (too much) volume.

I think JR needs to do some European tour for us..!! Or maybe I will wait for Nexus 8000 skate and just hope they change the fit...

[kovalchuk71 212]

I think we should put this to rest before it begins. No, Bauer OD1N skates will not be available custom.

[Stryker 37]

  On 9/15/2013 at 9:48 PM, MeltingPlastic said:

The only complaint I have so far is that unlike the retail Nexus, the drainage holes on the bottom of my skate were just drilled and not clean. It doesn't really bother me but to me, with the amount of money I spent, you'd think they have made it look nice like they do on the retail skates.

Read more  

Personally I've had good luck with drilling drainage holes and then using an eyelet to "finish" the hole off. Maybe see if your LHS could do something like that, just to clean up the look.

[ridindirty 11]

Id rather bump this than start a new thread...

I have been doing a lot of reading, and still cant find the answer to this written in plain english: Is a custom Bauer Supreme D and 'True D', aka a Vapor D... or is a Supreme D, aka an E width? And so on, obviously... is a C a 'True C' or is a Supreme custom C actually a True D, aka a normal Vapor?

Thanks.

[JR Boucicaut 3805]

Anything at custom is true, regardless of model. The only production skate that is at a true width is Vapor.

[Amiroo39 121]

  On 1/21/2014 at 5:33 AM, JR Boucicaut said:

Anything at custom is true, regardless of model. The only production skate that is at a true width is Vapor.

Read more  

I'm somewhat confused with regards to width. If you're a D in Supremes, would be an E in Vapors?

[ridindirty 11]

  On 1/21/2014 at 5:33 AM, JR Boucicaut said:

Anything at custom is true, regardless of model. The only production skate that is at a true width is Vapor.

Read more  

Thanks JR. What about the fact the Vapor has a tighter heel? When going custom is an A Vapor heel still tighter than a Bauer A, because of the last they are made on? Or will both A's then be the same fit?

Thanks

  On 1/21/2014 at 7:31 AM, Amiroo39 said:

I'm somewhat confused with regards to width. If you're a D in Supremes, would be an E in Vapors?

Read more  

I'm stock skates, a Vapor D is a real Bauer D width. A Supreme D is actually a Bauer E width. Edited January 21, 2014 by ridindirty

[JR Boucicaut 3805]

Supreme stock heel is B.

[ridindirty 11]

  On 1/21/2014 at 4:52 PM, JR Boucicaut said:

Supreme stock heel is B.

Read more  

Thanks a bunch. For some reason I thought it was an A.

[strosedefence34 178]

  On 8/4/2013 at 12:58 PM, JR Boucicaut said:

A is standard

AA is narrower

B is wide

Vapor skates are a true last, so a retail D is a true D.

Retail Vapor is DA and EEB

Retail Supreme D is E/A and EE is EEE/B

Retail Nexus D is EE/A and EE is EEEE/B

Read more  

  On 1/21/2014 at 4:52 PM, JR Boucicaut said:

Supreme stock heel is B.

Read more  

stock at EE right?

I'm trying to figure out what to do with my next skate purchase. Right now I am in a 8.5D Supreme and I feel like I can drop down a half size, but I think if I did I would have to get a EE. When I was trying on skates the last time the 8D my toes where scrunched but when I was in a LHS recently I put on a supreme 8EE and it felt good in terms of length. Is this recommended?

[JR Boucicaut 3805]

Sorry, yes

[ridindirty 11]

Haha so stock D supreme is an E/A, not an E/B?

Why is the Vapor heel tighter than? Because the lasts are different?

[Neo5370 132]

  On 8/4/2013 at 12:58 PM, JR Boucicaut said:

A is standard

AA is narrower

B is wide

Vapor skates are a true last, so a retail D is a true D.

Retail Vapor is DA and EEB

Retail Supreme D is E/A and EE is EEE/B

Retail Nexus D is EE/A and EE is EEEE/B

Read more  

Does this apply to junior skates as well?

[JR Boucicaut 3805]

  On 1/21/2014 at 5:29 PM, ridindirty said:

Haha so stock D supreme is an E/A, not an E/B?

Why is the Vapor heel tighter than? Because the lasts are different?

Read more  

Yes, and the internal workings are different as well.

[ccarrigan 2]

  On 8/4/2013 at 12:58 PM, JR Boucicaut said:

A is standard

AA is narrower

B is wide

Vapor skates are a true last, so a retail D is a true D.

Retail Vapor is DA and EEB

Retail Supreme D is E/A and EE is EEE/B

Retail Nexus D is EE/A and EE is EEEE/B

Read more  

This is great info to have when looking for skates. Is there a chart anywhere with other brands (CCM, Reebok) listed? Thanks for the information!

[ridindirty 11]

One more question... Can anyone with direct experience compare how a retail Supreme D compares to a Vapor EA?

Thanks.

[JR Boucicaut 3805]

  On 1/22/2014 at 7:51 PM, ccarrigan said:

This is great info to have when looking for skates. Is there a chart anywhere with other brands (CCM, Reebok) listed? Thanks for the information!

Read more  

Other brands are true to their custom sizing. D/A, E or EE/B.

[GiancarloSFL 15]

  On 1/23/2014 at 4:01 PM, JR Boucicaut said:

Other brands are true to their custom sizing. D/A, E or EE/B.

Read more  

Does this relate to length as well? I.e. a 7ee is 7 in length not a 7 1/4?

[backhander 0]

Looking at getting Customs. Could someone pls assist with the differences in liners? Pros/Cons of each or what people like and why.

[Caz 0]

  On 2/5/2014 at 12:38 PM, backhander said:

Looking at getting Customs. Could someone pls assist with the differences in liners? Pros/Cons of each or what people like and why.

Read more  

Yeah, me too. What is the process for this again? I want a custom pair this time around. Go to a Local Authorized Dealer and ask to have a rep sent down? I live in Charlotte, this is going to be a pain for sure.

[jbatafuco 6]

  On 2/24/2014 at 3:40 AM, Caz said:

Yeah, me too. What is the process for this again? I want a custom pair this time around. Go to a Local Authorized Dealer and ask to have a rep sent down? I live in Charlotte, this is going to be a pain for sure.

Read more  

Pretty sure there is a shop in Greensboro that does customs. Wouldn't rely on a rep... they're a mixed bag.

[TheRuz23 58]

when i got my customs done i didn't talk to a rep at all, i just kinda knew what i wanted and got them made up. received them in alittle under 4 weeks. Im not sure about every liner available but i opted for the grey clarino and i love it, i noticed alot of pro get the clarino its been holding up very well and stays very soft.

[laserrobottime 149]

Anybody know of a shop that'll order customs from someone out of town? Just want liner changes and quarter sizing options. Nobody near me does it.

[backhander 0]

  On 2/26/2014 at 12:56 AM, TheRuz23 said:

when i got my customs done i didn't talk to a rep at all, i just kinda knew what i wanted and got them made up. received them in alittle under 4 weeks. Im not sure about every liner available but i opted for the grey clarino and i love it, i noticed alot of pro get the clarino its been holding up very well and stays very soft.

Read more  

Thanks....I was thinking grey clarino and will likely be going this route with your feeback! I'm really looking for specific sizing which is easy to lock down so making minor changes are just benefits to the process.

My current thoughts are surrounding going with the new lacing system versus standard lacing. If someone has any further info that would be great.

I personally do not like my skates tight at the top so I can maximize knee bend. On X60's I do not lace the top eyelet and sometimes still feel a bit of restriction from the second eyelet; not sure if the new vs the old lacing system would be better.

[Jphillips348 0]

I'm new to ice skating and want to eventually play hockey... Unfortunately I have a EEEE width so I can't get into any retail skates. I'm going to custom order some Bauer skates (I'm aware this is gonna run me around $900-$1000). The guy at Kettler Capitals Iceplex Pro Shop said that when you custom order you get to choose all the details. I'm wondering what specs I should get? And which model would be best for me? Thanks for any help!