HattrickSwayze 3 Report post Posted May 7, 2012 I'm more concerned about the depth. I have never tried on the 8090's but the Flexlites and 2011 Supremes were not deep enough. I failed the pencil test on both. Are the Nexus skates going to be that much deeper than the current Supremes or am I wasting my time waiting for them?I'd like to know this as well. The NXGs fit my foot overall pretty well. Very comfortable, but the depth isn't quite deep enough for me. Customs aren't available locally and I'd hate to spend $800 on skates that don't fit perfect. Tried Flexlites and I was bursting out of them as well. Share this post Link to post Share on other sites
kredmore 2 Report post Posted May 9, 2012 Has anybody seen the Bauer Re-Akt titanium cage in person? I did and held it up next to the 9900 cage and while it is much lighter, the bars seem thicker than the 9900's bars. I don't really care much about weight just better vision. Is it me or are the bars thicker on the new cage?Is just the cage available yet? I see the combo is out. Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 9, 2012 May 15th Share this post Link to post Share on other sites
IDoezIt 9 Report post Posted May 10, 2012 Does anyone know what materiel the upper of Nexus 1000 skate going to be? Share this post Link to post Share on other sites
JR Boucicaut 3802 Report post Posted May 12, 2012 Does anyone know what materiel the upper of Nexus 1000 skate going to be?It's in the catalogue Share this post Link to post Share on other sites
iniesta 0 Report post Posted May 14, 2012 I'd like to know this as well. The NXGs fit my foot overall pretty well. Very comfortable, but the depth isn't quite deep enough for me. Customs aren't available locally and I'd hate to spend $800 on skates that don't fit perfect. Tried Flexlites and I was bursting out of them as well.I was able to try the Nexus 1000 on the ice. The Totalones are only a tad too shallow for me with just a bit of lace bite if I over tighten them. With the Nexus, I didn't get any lace bite at all. Share this post Link to post Share on other sites
cooperalls 4 Report post Posted May 14, 2012 RE-AKT cage (M) = 164g9900 cage (M) = 246gItech 908Ti cage (M) = 187gThe RE-AKT is noticeably lighter than my FM480/5K. Not earth-shatteringly lighter, but enough to notice. The wire placement is very similar to the 9900, it doesn't have the cut-outs on the sides. The wire shape is oval, but not as thin as the 9900. Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 14, 2012 Cooperalls, do you mind seeing if the Re-AKT is the same width as the 9900 and narrower than the Itech? I've always had a problem finding wide enough cages to not squeeze the temples haha. Share this post Link to post Share on other sites
cooperalls 4 Report post Posted May 14, 2012 Cooperalls, do you mind seeing if the Re-AKT is the same width as the 9900 and narrower than the Itech? I've always had a problem finding wide enough cages to not squeeze the temples haha.I measured all three temple-to-temple and got the following:Itech = 7 7/8"RE-AKT = 8"9900 = 8 1/4" Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 14, 2012 Wow, thanks a lot. I really had to crank open my old RBE III (M) to fit and was initially considering the 9900. Might have to go find another Itech in L or take a look at a Re-Akt in L.Edit: Coming soon, to a theatre near you...http://www.youtube.com/watch?v=u86CPTkw25g&feature=g-u-u Share this post Link to post Share on other sites
sammyg_16 2 Report post Posted May 15, 2012 it appears that the p08 doesn't come in any replacement blades Share this post Link to post Share on other sites
cooperalls 4 Report post Posted May 15, 2012 it appears that the p08 doesn't come in any replacement blades Nope, but Warrior offers the Kremlin W11 pattern in the Dynasty (tapered) and Evo/Mojo (Standard) blades. Little more extreme than the Bauer Ovechkin P08, but similar. Share this post Link to post Share on other sites
sammyg_16 2 Report post Posted May 15, 2012 Only problem is I can't find any kremlin patterns in any lhs I go to Sorry for derailing the thread Share this post Link to post Share on other sites
AlphaSierra 1 Report post Posted May 15, 2012 It is officially May 15th west coast time and I was disappointed in no Nexus goodness on the net. Then I saw the June 15th date. I am going for a drink to celebrate being a Rink Rat geek! Share this post Link to post Share on other sites
kredmore 2 Report post Posted May 20, 2012 Is just the cage available yet? I see the combo is out.May 15thWell, realizing I have to wear a cage these days for safety, I thought this would be a good change to my exisitng helmet/cage. Closer to a shield or no face protection at all.I just put the new cage on my 4500 helmet, both size medium. Easy to feel the difference in weight. Fit well, but one minor thing. The original True Vision II cage has a cut out on the sides for when coming close to the helmet/ear pieces. The Re-Akt cage does not. So, it's a little tight fitting when swinging up, but works. Also, someone mentioned the bars are bigger. They are, but on the flat side. If you look at the cage from the top or bottom, you will see they are flatter/bigger. But when looking straight on, as if wearing it, they are not any bigger. Similar to the oval bars on existing cages today.Overall, unless I'm missing something, this new cage should be a good product, as it's upgrade price is a lot less than than the old iTech. Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 21, 2012 They seemed to have been released May 18th instead of 15th, but regardless, they're out now.This cage is ridiculously light, I'm very impressed. Well worth grabbing a Re-Akt combo if you factor in the difference in price and the price of the cage separate. Share this post Link to post Share on other sites
jlvipers21 0 Report post Posted May 21, 2012 Fit well, but one minor thing. The original True Vision II cage has a cut out on the sides for when coming close to the helmet/ear pieces. The Re-Akt cage does not. So, it's a little tight fitting when swinging up, but works. I have the Re-Akt combo and noticed the same thing. Overall, I'm very happy with it though and it was well worth the money to upgrade from my 9900. Share this post Link to post Share on other sites
phunky_monkey 6 Report post Posted May 29, 2012 I was able to try the Nexus 1000 on the ice. The Totalones are only a tad too shallow for me with just a bit of lace bite if I over tighten them. With the Nexus, I didn't get any lace bite at all.How did you like them? Seems like these may be a good option for me... here's hoping anyway. Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 29, 2012 Got in the new APX protective recently and a couple of thoughts:- APX shoulders, if you couldn't tell from the catalogue picture, has a unibody construction now, so no longer the more free floating vest-like construction of the X:60s. Some may like this change. I really loved the way it hugged the torso, comparable to the U+Pros (very form fitting and close to the body without restricting movement). I found that often times, the rib area of the X:60 pads flared up and outwards above the strap. No longer the case here. The way it hugs the body is the biggest improvement imo- The Vent Armor in the lower chest/rib area are definitely denser than the floating softer X:60 pads; I consider this an upgrade in protection- The Free Flex shoulder cap is essentially a 2 piece plastic cap (you can see the difference in the silver and white sections; allows for a little bit of extra mobility-Excellent Free Flex bicep and arm guard; almost feels like there is nothing there- Elbows are pretty much the same, as in rock hard and unyielding. Hard and pointy elbow cap has me worried (heck, it's the same throughout the line too) Share this post Link to post Share on other sites
Hockeydog 8 Report post Posted June 6, 2012 I was able to try the Nexus 1000 on the ice. The Totalones are only a tad too shallow for me with just a bit of lace bite if I over tighten them. With the Nexus, I didn't get any lace bite at all. Sounds promising for my foot. How would you compare the forefoot width of the Nexus vs the Supreme? Share this post Link to post Share on other sites
iniesta 0 Report post Posted June 6, 2012 I'm a EE in a TO, but the Nexus 1000 I tried on was a D. The Nexus forefoot felt great even in a D. I didn't even get any pressure on the outside of my big toe as I get with the TO, but this maybe due to the insoles with the ergo toe in the Nexus. Share this post Link to post Share on other sites
bubaloo 6 Report post Posted June 11, 2012 just thought I would chime in on the apx shoulders, I love the fit and function, but my first wear pulling a strap off ripped the stitches holding the velcro. really easily too.top of the line gear and it falls apart pretty quik. going to need to take it in for re stitchin Share this post Link to post Share on other sites
jcommeau91 2 Report post Posted June 12, 2012 How stiff will the Nexus 1000 skates be compared to the x60's? Share this post Link to post Share on other sites
davidfinlay276 4 Report post Posted June 13, 2012 Edit: sorry, posted this in the wrong thread, feel free to delete my post Share this post Link to post Share on other sites
kovalchuk71 212 Report post Posted June 15, 2012 How stiff will the Nexus 1000 skates be compared to the x60's?Does anyone who has had a chance to check the skates out have a comment on this? Share this post Link to post Share on other sites
