VegasHockey

1: The difference is Sparx you pay less upfront for the machine but pay more over time with the rings, the Pro Sharp consumable rings last much longer. I did the match and if you keep both units they end up costing the same after 2 years assuming you only use one ROH. If you are using various ROH for different players and such the Pro Sharp is significantly more expensive. 2: Yes, I have done blind back-to-back testing in our store with Sparx and Pro Sharp portable units and 95% of players cannot tell the difference. I think it has a lot to do with the prep prior to sharpening and then finishing after the sharpening. 3: Yes, they are both user-friendly and fairly simple to adjust 4: Sparx warranty is much better than Pro Sharp in my experience 5: None that I can speak to. 6: I would say the Sparx can be used anywhere, living room, garage, wherever, it has a built-in filter and is a closed cycle system. I still would not use it in my kitchen though as there has to be some debris that escapes through the top of the unit. Better to be safe than sorry. The Pro Sharp has much more debris though, I would recommend using it with a vacuum attached to help control the metal shavings, based on this I would not recommend that to be used in your home amnd only use it in a garage or some other space.

I've used every single ROH and FIRE and I seem to always go back to 1" ROH on all of my standard width steel, but on my Flare steel I like the 3/4" FIRE

Because you said the following above which was implying RFID and NFC are different. At least, thats how I read it. No biggie.

I remember these. Loved them.

lts way cheaper, you get 3 in a pack for less than a Lizard Skinz, and actually has a good texture to it.

The skate is so adjustable once heat is applied that you can pretty much remove all negative space that you will never be able to get your foot into the boot. There was a player recently who we fitted and he hatesnall negative space in his skates, likes them to fit basically too small, kind of like Paul Coffey. He had us heat them extra long and wrap them so incredibly tight his toes ended up bruised. I think he is crazy but that's exactly the way he likes his skates to fit and TRUE skates were the only ones he has been able to accomplish this same fit. Also, the reduced facing I requested had nothing to do with volume adjustment.

Come on guys 😉 RFID is the process by which items are uniquely identified using radio waves, and NFC is a specialized subset within the family of RFID technology. Specifically, NFC is a branch of High-Frequency (HF) RFID, and both operate at the 13.56 MHz frequency.

That would make sense as the PS100 is significantly more expensive so they make more money up front and less per ring vs the retial model which they sell for less but make money from the subscription service of people buying rings. The good news though is the ES100 and PS100 are the same units 100% excluding the vacuum system and software/firmware.

They are exactly the same, the packaging is different and the NFC codes apparently are different as well.

Yep. This also seems the case with people with big mitts.

I had a friend testPS100 rings on an ES100 today and it will n ot recognize them....

Grip on sticks works great until your gloves become soaked with sweat, it then it has less effectiveness, while tape provides a rough texture to aid in friction. I personally use very little tape. I like keeping the stick feeling light and also like direct contact and feedback from the stick without a dampening layer. I personally love using a very small amount of this stuff. https://www.bladetape.com/product/griptape-black/ That being said, I don't think it's nearly as necessary as it was previously so it's more of of habit than anything. Younger players seem to be using less tape or other alternatives such as rubber butt ends and such.

These skates have a lot of AS1 pieces on them and arent the true design of the AS3 Pro. When you see the AS3 Pro you'll know what I mean.

It works decent but doesn't last long. I'm more interested in this when it becomes generally available. https://instagram.com/rezztek?igshid=8vqurd6eynrz

I think Hockey Monkey. Right?

I'll take some better pics of it on when I get back from Miami Beach. You'll see it's not that big.

LOL. Yeah, I like the cage off my face a little but not THAT much.

The PS and ES use the same rings. The XG rings should not be used in the ES units and I am not sure if Sparx ever updated the firmware on the units or the encoding on the XG rings NFC to allow/disallow the use of them. You will likely have to email them to find out unless they reply here. I know their stance is to not use the XG rings in the ES units. Also, the XG rings should only be used to remove large amounts of material or when you sharpen new skates. These should not be used constantly and the finish on them is not ideal. If you are sharpening skates that have already been sharpened previously you should not need more than 1 or 2 passes unless the blade has serious trauma.

it's just the angle of the shot.

Here are some pics of my TRUE lid, size M with an L Bauer Re-AKt cage.

Funny you mention 9.5/10.5 as thats what is now standard on the TRUE Shift holder STEP steel and it feels almost exactly like a Quad 0.5.

My store bought a bunch of TRUE AX9 pro stock sticks and I have been using two of them for about 2 weeks and roughly 30 hours of ice time so I figure I have a pretty decent amount of time with the sticks at this point to provide some feedback to others who are eagerly waiting for the retail version launch. This is not a review as I still need more time with the stick but I have had a lot of people message me, Instagram followers, asking about the AX9 as they know we got a bunch of them in at the shop. About me: Age: 39 Height: 5'11" Weight: 185lbs Shoot: Right Preferred shaft flex: 70-80 (varies on stick and kick-point) Preferred blade pattern: P28/TC4/W28 (max height when possible) Position: Center or Left Wing Overall the stick feels like the next generation of A-series, which is good. I am a big fan of the A6.0HT and SBP as I have always felt they had a good feel and balance. My biggest issue with TRUE sticks has always been with the blade. The first generation XC9 the blade would fall apart, usually due to the urethane insert being exposed and not inside the actual blade itself, but also the toe of the blade would wear far too quickly. I think all versions of the A-Series had these issues as well, the tow of the blade always seems to wear out very quickly. I personally have never had a TRUE shaft fail, only blades with my TRUE sticks so the overall durability has been pretty good. When TRUE added the BRT+ it made things better as far as overall blade durability but the BRT didn't really address the issues I had with the toe of the blades continuing to fail far too quickly. Disclaimer: I do not tape the toe of my stick, and yes, I shoot off the toe, so this contributes to wear but compared to any of the other brands of sticks I have used my TRUE sticks blades have always worn much faster and the resin itself delaminates. Now, on to first impressions. The looks are awesome. I like how they incorporated the chrome accent but left the rest of the stick fairly plain. I hate flashy sticks so I always felt TRUE has incorporated just the right amount of flair into their graphics. Enough so you recognize the stick brand but not overwhelming as Bauer has dont with the new Vapor series which is overly busy and too loud. The shaft shape on the AX9 is more like the Nexus, kind of flat on the sides with rounded corners. It's not as concave as the A-series and not as boxy as the X-series. It's my favorite shaft shape. The flat sidewalls give you a good stable grip and the rounded corners allow you to rotate your wrists nicely. The blade seems to be mostly the same, it does look like they did make some changes though as the blades now have a textured pattern. I am not sure if the retial model will come like this since these are pro stock versions but I hope they do release them with the textured pattern. I have never liked the fact that Warrior and TRUE retail sticks are very slick without any type of textured pattern on the blade. I can say that the durability of the new AX9 blade is much improved. After many games and drop-ins, I have seen a single mark on the blade whereas my other TRUE sticks would be showing some wear by now. Kickpoint seems to have been moved up a little making the stick much more dynamic. It's still easy to load but it doesn't feel like its a single use stick anymore. If the A6.0HT was comparable to the Vapor 1X Lite I would say this new model is more like a Warrior Alpha DX or a JetSpeed FT2. The kick point is still low, but not so low that you lose power when shooting or the shots come off the stick with low accuracy. The pucks fly off this thing. There were a few goals I nabbed from the top of the circle that the goalie just didn't even see soon enough to react. So if you are looking for a quick release this stick has that. I usually score from below the top of the circle but since I am getting a little more power into my shot I can shoot from a little further out. Weight! Thats the big thing here. Damn, this stick is light. TRUE says 393 grams and I would say that might be an understatement as mine came in at 389 before I cut it. I think 390-400 grams is a sweet spot for me when it comes to sticks so it's taking some time to adjust to a stick this light. Really hard passes are sometimes hard to cradle and there have been a few times when leaning into a one-time shot that I could feel the stick lose leverage to the puck due to how light it is. It feels lighter than 389 grams too! TRUE always talks about swing weight and while on paper the Vapor/Supreme ADV and such may be lighter if you hold this in your hand and swing it compared to those sticks the TRUE feels noticeably lighter. Overall I am very impressed with the new AX9. While I thought the A6.0 HT was a very solid stick it felt like it was designed more as a single-function stick and was not dynamic. It was good at quick release, but everything else was just good, not great. The AX9 has taken this up a notch and I think it does everything great.

5'11" and 185lbs.

Yeah, the numbering system actually sucks IMO. Too often I get people thinking the Q0.5 sits between the Q0 and Q1, which any normal thinking person would assume. lol

I think I heard these are basically the same as a 1N sticks with a new graphic.