Pro stock mission blades

[TBLfan 25]

I'd just like to let you guys know that I was having some issues with my blades wear and tear on the bottom of the blades. These are the "big toe curve" that doesn't have a finish on it. I just put a thin layer of epoxy on the whole blade in hopes of solving this issue. I'll update anyone on the status because I'm sure I'm not the only one with this issue.

[sweetblazer 0]

Has anyone ordered the #15 yet? I'm really interested in how straight we're talking? Either that or the dicassimirro?

[CapsFan 5]

I'd just like to let you guys know that I was having some issues with my blades wear and tear on the bottom of the blades. These are the "big toe curve" that doesn't have a finish on it. I just put a thin layer of epoxy on the whole blade in hopes of solving this issue. I'll update anyone on the status because I'm sure I'm not the only one with this issue.

Any update TBL??

[TBLfan 25]

It worked out well, I love the blades! I actually just bought another one of these mission blades(not the toe curve) from a user here. But I've been using OPSs for the past few months. Occasionally I do use the flyweight with the big toe curve but the allure of the OPS has been too much for me.

[kornsined 0]

anyone have any clue what the remaining curves left (27,252,479,442,330) look like? http://hockeymonkey.com/pro-mission-hockey...te-tapered.html

[TBLfan 25]

New sets of pro stock blades up at HM. Let's see some patterns.

Anyone near hawk care to find me some big toe curves? :D

[Abbieshockey20 1]

I ordered 8 today, yes 8. First I planned on ordering 4 to go with my shafts, then noticed that 4 tapered wood blades were $20, so I got 4 of those. I ended up with 4 Horcoff tapered wood blades, 2 Elias tapered composite blades, 1 Gaborik tapered composite blade, and 1 Federov standard composite. Went by the curve descriptions (probably wasn't a good idea) and picked up mostly open mid-toe curves. Hopefully I'll like the curves!

[acollette49 0]

just when i thought i could stop spending money for a few months...

(on sticks and blades, that is)

[kornsined 0]

I ordered 8 today, yes 8. First I planned on ordering 4 to go with my shafts, then noticed that 4 tapered wood blades were $20, so I got 4 of those. I ended up with 4 Horcoff tapered wood blades, 2 Elias tapered composite blades, 1 Gaborik tapered composite blade, and 1 Federov standard composite. Went by the curve descriptions (probably wasn't a good idea) and picked up mostly open mid-toe curves. Hopefully I'll like the curves!

I have a horcoff. It's a really wide blade and about an inch shorter then standard blades. Nice blade actually.

[TBLfan 25]

I wish they had the satan in tapered... and for some reason I want to try the hull... even though last time I had one in my hands I just shook my head and put it back in the box until I eventually sold it.

[Rustpot 1]

Looking for a slight curve 6 lie right hand, anyone know? Their newest batch just has locations and face, no depth or lie.

[supahdon 0]

Anyone near hawk care to find me some big toe curves? :D

They didn't have that many in store, maybe 5 at most of the RBK/CCM/Koho pro blades they listed. They had like three or four of the Mission pro blades.

[TBLfan 25]

dammit. We need a HM insider.

[CapsFan 5]

Anybody know if any of the LH mid-toe or toe curves (comp or wood) have a 5 lie? I'm guessing there isn't a way to find out. :(

[x107metallica 0]

got me a hull prostock had one a while back nice to get a new one.

[Rustpot 1]

http://i22.ebayimg.com/02/i/000/b2/ef/2046_1.JPG

What lie is this lang, would you think? I'm terrible at guessing. It's basically an open slight heel. I remember his blade being more Hull like in the toe, but that pic looks good.

I think I'm going to get 2 wood and a comp. might just have to pick up a new tapered shaft. Anyone got a 77flex NBH? XXX shaft or cut ops :D

[The Stranger 0]

^If I remember correctly he uses a 7. That stick looks higher than mine and I use a 6 so that seems right.

[Rustpot 1]

Yeah, I just busted out some Law of Cosine and figured it out.

Looks like I'm in for a Lang for sure, possibly a 266 and a Deadmarsh.

Unless someone can chime in with a 6 lie drury.

[sNIpEr3 0]

Anyone got close to an easton Drury in LH???

[echi24 1]

anyone kind enough to describe some of the patterns available this time around? thanks in advance

[texanhockey 0]

just bought 6 wood tapered blades in the green pattern. i'll take pics as soon as they come in. hope i get lucky !

[Michael9 57]

I ordered 2 Boyes, 1 Lindsay, 1 Paris and 2 Preissing all RH. I will post pics as soon as I recieve them.

[Buzz_LightBeer 974]

Priessing uses RP's in easton

[DEATHTRON 19]

5 Taylor's for me...anyone gets a Taylor and doesnt like it, look me up.

Zach

[bored4 0]

no one knows whats one is a Drury yet? man i wish i could get a retail Ribeiro curve in a standard hosel.