Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble

Leaderboard


Popular Content

Showing content with the highest reputation on 01/13/20 in all areas

  1. 4 points
    Because he's sharpening super damaged and very uneven edges on every single pair he does, and he can't relate to anyone who isn't. Nor can he see 10 yards down the road, where if his 'customers' are happy they'll come back with even edges that are just normally worn and he won't have to do more than 4 passes the second time he sharpens the same pair of skates. I dunno... the guy has come into this thread and crapped on Sparx from the get-go. It's getting a bit tiring to be honest. We all appreciate new info and rational debate about the product, but that hasn't been the case here. colins
  2. 3 points
    I sharpen a lot peoples skates on my Sparx, from 12U kids down to 6U and a bunch of guys that play in my beer league. I think my first ring, I got about 30 pairs of skates sharpened and that was with 2 pairs that I had to do 10 cycles on and 8 cycles, respectively. If someone is bringing me a brand new pair of skates, I politely ask them to have the first sharpening done at the LHS or at a minimum have them cross grind them and then I'll sharpen them after that. Mos of the people who I tell this to are ok with that response because they understand that I can't get a cross grind ring, but they know from others that I'm putting out a good product for them. I constantly get great feedback on the edges they have after I sharpen them. I agree with most here that you know how many passes you're going to get out of the ring and it's your job as the sharpener to figure out how many passes you need to do. Also, if someone brings me steel that has a ton of larger nicks/gouges, I charge them extra as I have to do extra passes on them to get them back to normal. Even with my extra charge, it's still about the same as going to the LHS but they're getting a more consistent cut every time.
  3. 2 points
    This is like trying to compare apples and oranges, a sparx unit versus a traditional sharpening unit both have strengths and weaknesses. Your running costs with a traditional unit will always be cheaper but it requires a lot more skill to get a good sharpening. A sparx is plug and push, no skill needed as long as the alignment is correct. You got 25 sharpenings, let's say you charged 10 euro a sharpening, if I was running a shop I would not be comfortable with that return. However as a home user at 3.2 euro per sharpening versus a LHS charge??? What is there to not like about that cost other than we always want it cheaper? If you are unhappy then maybe charge a per pass cost? Then if they turn up with massively damaged blades you get a higher return for your sharpening (if a financial return is a key driver of what you are trying to do).
  4. 2 points
    Howdy, A couple things: 1st, generally speaking when I do other folk's skates I do 4 passes unless there are problems. Usually those 4 passes are enough. You cannot make a categorical statement like you are above. When I'm doing my own, I usually do 2 or 3 passes. 2nd, if you're doing other folks skates, presumably you're not doing them for free. Charge enough to cover your consumable cost or don't sharpen them. Mark
  5. 1 point
  6. 1 point
    My new setup is almost complete with the jersey!
  7. 1 point
    So two years ago I was coming off an almost 10 tear spell where I didn’t play much, just coached. So once I started up again I found I needed to replace some gear. These were replacing an old pair of Vapor elbows that really wouldn’t stop sliding down. I am 6’3”, 180 lbs so on the thin side, was looking for an elbow that would be fairly low profile and would stay in place. I play mainly regular invite-only games so while the games have a good pace, you don’t have to worry about getting hacked or slashed. Protection is mainly for stray shots or getting tangled up with someone and going down here and there. Fit I have these in medium. They have the inner sleeve and a forearm and biceps strap. The elastic sleeve is nice, I wear short sleeves so, it is right against my skin. Because I am thin the biceps area isn't tight but the sleve does seem to help keep it in place and is snug in the forearm and right at the elbow. The 360 strap on the forearm lets you get the tension right where you need it. The three piece design means your elbow goes right into that pocket and keeps it there. 8/10 Protection Again, I don’t play in a contact or chippy league, but because of the fit, I never have to adjust them like I used to. Being in the proper spot contributes to protection. I have gone down here and there and this is a case where if you don’t notice, it is a good thing so I am assuming it is doing its job. It provides full coverage around the forearm and the elbow cap is substantial without being bulky. 9/10 Weight The Vapors I had were pretty light, these are on par. I don’t notice them so I have no complaints here. 10/10 Durability So far they are holding up well. I average about two games a week and have had them about a year and a half. The only thing is as you would expect the elastic on the 360 degree strap is getting a bit relaxed but not enough that it affects the tension. This is an area I will be paying attention to as there is nothing to hold it in place except friction. I keep expecting it to slide off the front edge but so far it hasn’t. The rest of the elbow shows no sign of wear. 7/10 Intangibles I was looking for comfort and something that stayed in place, and these provide that. As an intangible I think the STX Surgeon equipment looks great with the gray, black and white. Doesn't matter much for protective stuff but just my opinion. 9/10 Conclusion I am really happy with this purchase. I think STX is bringing great equipment at very reasonable price points. Once my son gets a bit bigger I will be buying STX for him and will be getting shins for myself next. 8/10
  8. 1 point
    $20 Play it Again score.
  9. 0 points
    I really don't care colins. I love my Sparx machine and I can clearly see the benefit for a home-user!!! I just don't love the costs and the fact that they are taking away features yet charging more and more for the sharpening rings!!! All i wanted to do is to find a way to bring costs down for international users by taking a look at the different consumer/ commercial rings and by pointing out to other customers that sharpenings come around 3,2$ in europe given the quality of sharpenings locally and the amount of cycles you have to do to work things out. (80$ rings!!!!) The results so far are 25 sharpenings of poorly maintained skates and that's a fact. Basically every skate, except my own pair of new skates, caused an unbearable noise while sharpening. To get rid of that, it took 5-8 cycles per skate=10-16 cyles per pair!!!! All I wanted to point out above was that Sparx promises a grinding ring mileage that works nicely under isolated conditions. That's all. If you are using the machine for yourself, it's the greatest thing ever, but as soon as there are any variables introduced it's economically unsustainable for international buyers. that's all from my side
  10. 0 points



×
×
  • Create New...