Law Goalie

badger, I can almost guarantee the tilt is being caused by the interaction of your pants and thigh-boards with your pads. Seriously, get rid of the thigh-boards and find yourself some knee-pads. Whatever annoyances the knee-pads may present, they are nothing on the problems that thigh protection attached to the back of the pads can cause. If you can find a pair of John Brown's, they are worth their weight in gold; failing that, the new CCM KPPRO ones look promising. I talked about them a fair bit in the 2015 CCM catalogue review, but I haven't had a chance to get my hands on them yet. It's also possible that your pants themselves are jamming on the backs of the pads. Remind me: what pants/pads are you using? If they have flat thighs, large ridges on the outside or inside of the thigh, or thick padding on the inside of the thigh (around the leg) the pants may also be among the culprits. That said, there are some technical improvements that can make modern pads behave a little better. The main thing is to try to be as 'snappy' or 'crisp' with your knees as possible. When you're driving your knees down, really drive that movement with internal hip rotation; conversely, when you're recovering, snap the knee(s) back up through external rotation. As long as your pads are strapped properly -- loose enough to allow your knee to rotate behind the pad, but not so loose that you're falling out of them -- your pads will stay facing forward (ie. square to the plane of your body) consistently. Snapping your knees down will ensure that they don't get 'jammed' at the corner of the back of the pad and the knee-block, and snapping them up will ensure that the pad stays square as your knee returns to a standing position. You can practise this without full recoveries. Butterfly, then snap one knee up (until your skate-blade is on the ice) then slam it down again, and alternate; when you feel like you're getting really good coordination, you can start lifting the alternate leg while the other is still going down. From there, it's just a short move to the 'impressive' (but only minimally useful) double-leg or 'pop-up' recovery, which doesn't require anything like the core strength or balance that many people think it does. If you find yourself trapping or squeezing a lot of pucks on top of your pads, that's usually a sign that a goalie is holding his (or her) hands a little far back. Try holding them well out in front of you, so that they're in your foveal (forward) visual field, rather than in the peripheral field. This may feel utterly bizarre at first -- you may feel like a Romero zombie, reaching out in search of brains -- but your hand/eye will improve dramatically, and, in addition, holding your gloves further forward makes them 'bigger' to the puck's perspective, 'cutting down' the shooting angle even further. (It's like having bigger gloves for free.)

While you may never be able to prevent diffuse axonal injury with a helmet, there are certainly ways to make helmets that help to dissipate shearing impacts. The problem is that they invariably create either disposable or mechanically complex helmets, and always very expensive ones, and those aren't things most hockey players are willing to accept. Even among goalies, who carry a minuscule risk of concussion (properly speaking) but an enormous risk of repeated sub-clinical trauma (which we're barely beginning to understand), very, very few goalies are willing to spend money to protect their brains.

Absolutely. Excerpt: Or you could just remove your toe-ties altogether. I haven't used them in years. I originally took them off for coaching (so I could pop my pads on and off as quickly as possible), but then started using that pair sans toe-ties in a few skates and games, and gradually realised I didn't miss the toe connection at all.

Yeah, I'd say based on that first picture, you could stand to go up an inch in Brian's, and maybe move to a +2 on the same standard. Overlap at the thigh is rarely a problem, and it's easy to adjust. The other thing you can do is to try to pull your pads a little higher on your skates by getting a little extra leverage through the boot-strap: putting it through the heel or around the back of the ankle (Lundqvist-style -- I remember you mentioning you were looking at the new Reactor skates), and tightening a notch or so. Based on your reference images and what you describe (caveat: not an MD, B.Sc., etc.) I'd say you've got the diagnosis down. Your relaxed seated posture is almost certainly an indication of the degree of hip rotator weakness and inflexibility that's hindering your butterfly, and it's probably pretty severe. The good news, there, is that flexibility really is trainable at any age and almost any fitness level, and you'll notice huge gains pretty quickly. I highly recommend (on the advice of Maria Mountain, Mike Boyle, and others) getting a foam roller to help loosen things up. They're cheap and ludicrously effective. Combined with exercise, you will make great strides faster than you'd think. That said, I think if you focus on changing your pre-shot behaviours -- widening and deepening your stance just a little, squeezing your knees together (via mild internal hip rotation), as you see the shooter loading up -- you'll be able to both use your current level of flexibility more effectively and lay the groundwork for your off-ice training to translate into your game. Bravo, sir, and godspeed. If all beer-league goalies were blessed with your sportsmanship -- not as fair-play, but as a comportment to sport -- the world would be a better place. By the way, sorry to talk about you in the third person when you're clearly present in the thread; just a habit.

Excellent analysis, PSU, particularly with respect to the heel-clicking attempts to stop five-hole shots. I'm actually working on a lengthy 'basic butterfly' post right now (thanks to Canada Day), which I hope will be both relevant and helpful, but there's one other thing I'll throw in right now. Having glanced at a few of Optimus' clips, I get the impression that when he anticipates a five-hole shot, he narrows his stance; this leaves him trying to knee-drop on top of the shot, rather than butterflying in front of it, and then (as you note) trying to trap the puck with his heels rather than stopping it with the front of his pads. I've often noticed this narrowing of the stance, and these related problems, with older goalies who grew up watching and emulating stand-up goalies. What I'd suggest for the moment, OR, is to try to focus on what your body does when you anticipate a shot. Starting in the warm-up, focus on widening your feet (even slightly), bending your knees (again, even slightly) and squeezing your knees together as you anticipate the shot; when you see the release and know it's going five-hole, push your knees down and together and forget about your feet: your knees will make the save, not your heels. Again, much more to follow, but I thought this might be a good way to introduce it.

Badger, I promise you that they're A) trying far harder to score on you than on Mr. Coney Plank, and B) far more delighted at the prospect of even attempting to score on you, whatever the outcome. Without goalies, hockey dies.

Your goalie's gear is stupendously nice. Is that a Protechsport mask he's wearing? The chin and forehead profiles look familiar, and given the Roy connection, it would make sense. (Though it's clearly not a Roy shell.)

Oh crap, I forgot to finish the pants... more after supper and library... There, done!

Finally getting the 'Lundqvist Loop' on the back of the Reactor skates is a nice touch. My one concern for Bauer, and it's been there for a while, is with their junior and youth offerings. The fact is that when I advise parents and hockey associations on what to buy, I have to tell them that they cannot buy a Bauer pad that has decent medial surfaces (ie. the things you slide on when you're in the butterfly) under a size 26+1. This was not always the case. I bought a few sets of *wonderful* Bauer One-series youth pads that were 21+1, and were essentially miniaturised pro pads, which definitely does not describe Bauer's only current youth and small-junior sized offering the Prodigy 2.0. The Prodigy Youth pads are basically road-hockey pads. I can't teach basic techniques -- not even butterfly slides, but simple transitions -- to kids who are wearing them. The pads stick to the ice, and they get frustrated. And so, for the first 4-6 years of hockey, I have to tell goalies and their parents and the associations they play in not to buy Bauer pads. It's certainly not impossible to make good youth pads. The Reebok X24s are very good, as are the CCM E-Flex II 760; the Warrior Ritual G2s are terrific, and the Brian's Netzero are solid pads as well. For some reason, Bauer seems to have simply given up on this part of the market. The real shame is that Bauer's Prodigy Youth catching glove is, bar none, the best on the market. It has a nice, deep pocket that can actually hold a regulation puck, and the break is designed so that small hands can actually open and close it. The blocker's a little weak -- the finger protection is feeble, and the boards folds in half under moderate pressure -- but it is usable. Still, I would imagine Bauer would much rather have people buying full sets of gear rather than just gloves. Having a great glove is nice, but that doesn't inspire brand loyalty the way a full set can. I've watched countless goalies enjoy the Bauer Prodigy gloves and then move on as their hands grow, and almost as many show up with shiny new Prodigy pads only to go home disappointed and frustrated after their first time on the ice.* *Just to be clear, I never say anything negative to the kids; they're far too suggestible. I just observe their frustration, and then pass it on to the parents and coaches along with the simple explanation. This is not to slam Bauer by any stretch: they make excellent products, and they're a crucial part of the hockey industry. My concern is that they really seem to have given up on the youth market, and that's a dangerous game even for an industry-leader in sport to play.

As part of my nostos, I took a quick leaf through the catalogue. On the surface, CCM's core offerings don't appear to have changed much, but when you look a little more closely there are some very interesting developments. In particular, CCM's work on the 2015 Premier Pro knee-pads and pants makes them potentially the best lower-body combination on the market. The move to use D3O (that's D-three-O, as in Ovechkin) in areas that have traditionally used thicker and heavier high-density polyethylene (HDPE) is an interesting one: the palm of the catching glove, and, strangely, the palm of the blocker as well; the sternum plate on the Premier Pro C/A; and, perhaps most promisingly, the anterior (front) hip padding on the Premier Pro pants. For those who are unfamiliar, D3O (which is actually a company that produces a variety of materials based on its core material technology) is a suite of materials that are (to varying degrees) soft and pliable when inert, but harden on impact: the molecular composition changes in proportion to the energy of the impact. CCM has included a brief introduction on p.41 of the catalogue, but d3o.com has a great deal of information. PANTS (p.38-40) Anterior hip (or as CCM calls it, 'groin') padding is one of the most difficult things to get right in goalie gear. Years ago, CCM offered a fantastic pant -- the venerable two-piece 620G model -- that included perhaps the best possible protection: three triangular HDPE plates sewn into the front of the hip, overlapping or bridging with the plastic 'hip cup' on the side, so that they couldn't be driven back by an impact. The problem, of course, was mobility. Modern goaltending requires tremendous flexibility through the hip, and the 620G design couldn't provide it without major modification. As the CCM brand gave way to RBK/Reebok, RBK copied the 620G design in its first-generation Premier pants, but quickly moved to a different anterior hip design. From the Premier Series 2 (PS2) onward, Reebok's pants all featured two triangles of soft, medium-density foam sewn more or less as the top two 'plates' on the 620G had been oriented, but changed the bottom triangle to a 'flap' that overlapped with the top of the thigh. This overlap with the thigh was crucial, because it not only removed a small 'chink' in the armour of the basic 620G design, but greatly increased its mobility. As the goalie's hip flexes forward, the flap slides further down over the thigh; as the goalies hips extend, the flap retracts. This design gave a significant improvement in mobility, but unfortunately, relying on a combination of medium- and low-density foams in this area did not provide sufficient protection for most high-level goalies. As a result, Reebok had to institute the same division between retail-pro and pro-issue equipment that existed in its C/A lines. The retail-pro line was largely foam-based, while the pro-issue models (which otherwise appeared identical) had additional plastic plated sewn into the front of the hip. Some pro goalies didn't have this done, trying to maintain maximum mobility in the hip and relying on the massive upper shields of their jocks for protection, but many did. For reference, here are a shot of some original 620Gs, and some 'CCM 11K'-branded pants for Mike Smith that are clearly 620s with an added lower hip-flap: (Incidentally, I suspect the above Smith pants were not approved because of the way the later (outside) thigh padding appears to extend beyond the edge of the main thigh-guard, creating the kind of 'ridge' that Rule 11.4, clause 1 aims to eliminate.) The addition of D3O to the anterior hip padding, replacing the outer player of plastic, could in theory yield a pant with largely unimpeded freedom of movement through the hip while still providing, through the transformation of D3O on impact, 620G or pro-grade levels of protection. What's unclear to me, at this point, is whether CCM has used D3O padding in just the lower flap (as pictured in the catalogue) or in all the padding in the front of the hip. Personally, I would have liked to see CCM move more toward the above Smith design, with three flexible D3O 'plates' and a fourth flap that overlaps more with the top of the thigh, but so many goalies have liked that 'two-and-one' design from the Reebok Premier 2 pants that I'm willing to believe a material upgrade in protection would make for terrific retail pant. I continue to be confused by the preponderance of bulk that manufacturers keep cramming into the sides of the thighs of goalie pants -- especially the medial (inside) edge of the thighs. I know some of it is removable -- as in the CCM pants under discussion -- but it's still rather a lot. Here's an 'up-leg' shot of the 2015 CCM Premier Pros: Maybe some people are getting hit in the inner thigh a lot more than I am, but all this extra padding presents two massive drawbacks. First, it severely limits the goalie's range of movement in skating. Goalies may not do crossovers on a regular basis, but a proper butterfly push or recovery that is diagonal (rather than straight sideways) is very similar to a crossover, and actually requires more range of movement. This great whack of padding effectively limits or even prevents this. Second, extra padding between a goalie's thighs prevents the knees from being squeezed together in the butterfly. While this is theoretically fine if you have outrageously good internal hip rotation all the time (ie. 'butterfly flare', the ability to push your feet forward in the butterfly), that's not something everyone can or even should do all the time. Even a supremely flexible goalie needs to be able to throw a narrower butterfly on occasion, because the internal rotation of the hip limits the ROM in butterfly and recovery movements. More to the point, when the puck's at a lower angle, you don't need or want to have to throw a wider butterfly in order to keep your five-hole closed. None of this is a huge problem -- you can, of course, take half of that inner thigh padding out with Velcro and snip the other half away with a pair of scissors -- but I think it is worth discussing. Even if you're terrible worried about getting a puck on the inside of the leg, just squeeze your knees together, and the large thigh-guards will come together and cover everything quite nicely. I'm not entirely sure what the point of the lengthening zipper is, since it would lower the bottom edge of the thigh 1" by opening a 1" gap in protection at the hip, and I'm always worried about zippers on goalie gear being exposed to impacts, but it seems like it's held up reasonably well in prior lines. As a final side-note, I continue to be baffled by the emphasis on internal belts in retail goalie pants. I'll admit I was a big fan of internal belts for a while-- right up to the moment I went back to suspenders, which simply offer superior mobility all around. I say 'retail' goalie pants because I've never seen an internal belt on pro-issue pants, and it's my understanding that an internal belt would violate NHL Rule 11.4, clause 4, as well as clause 1; though clause 1 is intended to cover 'cheater' ridges that might trap the puck, the basic principle disallows any attempt to artificially increase the effective size of the pants, which is exactly what a floating internal belt does. If someone can find a pair of pants with an internal belt and Kay Whitmore's signature, fair enough, but I've never seen that. I'd much rather see goalie manufacturers through a pair of suspenders in with each pair of pants. Not only would this give goalies the best possible fit and function off the rack, it would effectively eliminate the need for the zipper-lengthening system. Want longer pants?-- let your suspenders down, and you can do it a fraction of an inch at a time, instead of an inch lower or nothing at all with the zipper. C/A (p.34-37) While there is still a definite family resemblance between the CCM Premier Pro C/A and its RBK 'Bumblebee' Premier forefathers (apart from the black-and-yellow/gold colour scheme), the design has begun to diverge noticeably. The Jofa-inherited 'JDP' hard-cap elbows remain, as do the extra yellow flaps on the arms, the separate rib protection and belly-plate, and something in the overall profile, but the shape of the belly and chest bocks, the shoulder-floaters and shoulder-caps, and the overall fit through the shoulders is significantly different. For those interested in the adjustable shoulder-floaters and chest-harness, The Hockey Shop has some good pics in their review. While a lot of C/A's in recent years have offered *vertical* Velcro adjustment in these areas, the CCM Premier Pro is the first I can recall that allows for apparently significant *lateral* adjustments. If you look at this picture (from the above review), you can see that there's maybe an inch of room on either side of the Velcro tabs to widen and narrow the fit: This lateral adjustment is a huge improvement for goalies who prefer their shoulder-floaters to cover the top of the clavicle and trapezius, rather than floating out over the shoulder, or a snugger fit through the chest. In short, it looks brilliant. I am a bit surprised that CCM limited the use of D3O to the sternum plate. Obviously this is a sensitive area that's also broad and flat, meaning that impact diffusion here is critical. Still, I would have liked to see D3O in other critical impact areas -- namely the elbows and shoulders -- where mobility is more important, as on the pants. The sternum, of course, doesn't move much, and the ability to reach across the chest (or 'hug yourself', as it were) is limited as much by the underlying HD/LD foam blocks as by the external shield. Perhaps CCM tested elbow- and shoulder-floaters made of D3O and weren't satisfied with the results, but it seems like a good approach to my mind. NOTE: it is *possible* that CCM did, in fact, use D3O in the elbow-floaters (what the catalogue calls the "arm hinge"), based on the similar molded markings and the fact that both are listed in similar terms on p.36 (but not using the D3O trademark). If so the catalogue is utterly unclear on this point. The only part of the C/A that is clearly stated to include D3O is the sternum plate. Likewise, i was a little surprised not to see D3O added to any of the other protective gear: it seems like a good fir for a lot of things, like the neck-guards, jocks/jills, padded shirts, and knee-pads (p.48-49). However, I'm willing to give CCM a pass on their apparently limited integration of D3O into their less 'sexy' protective (which may not have been without reason) because of something they appear to have done VERY well... KNEE PADS (p.49) I am shocked that so little fanfare has attended the 2015 CCM KPPRO ("Pro Goalie Knee Protector"). Perhaps they're not widely available; perhaps nobody was paying attention. InGoal Magazine doesn't even mention them in its coverage of the Extreme Flex II launch, or anywhere else. Whatever the reason, the world of goaltending seems to have missed out, so far, on something extraordinary. A goalie who has never played with knee-pads is either one mistake away from a major if not career-ending injury (no knee protection), or has never truly enjoyed the benefit of modern pad design. Those who wear no knee-protection are simply deranged, risk-seeking lunatics; those who use thigh-boards or thigh-guards, by any other name, attached to the back of the pad are using secondary protection that fundamentally interferes with the free and athletic rotation of the knee (via the hip) behind the pad. Yet any goalie who *has* used knee-pads will tell you how incredibly annoying they can be. Getting correctly-fitted knee-pads that protect as they should and stay out of the way is one of the hardest things in goaltending. Some guys (like me) end up making their own; some limp along by using hockey socks and half a roll of tape to keep borderline non-functional knee-pads in line; some regress to wearing garter-belts; some give up altogether. In short, the 2015 CCM Pro knee-pad appears to be one that every goalie should try. As The Goalie Crease (a terrific and highly knowledgeable goalie shop north of Toronto, in Richmond Hill, NOT to be confused with goaliecrease.net) notes on its product page, the CCM KPPRO is related to a surprisingly short-lived 2014 Reebok offering: "Initially launched last year under Reebok branding, the KPPRO knee pads are an amazing product to say the least. With their revolutionary hinge system, that allows the knee pad to move freely and function both while down along the ice with maximum coverage or while standing with no hold up at all..." While TGC is correct to note the similarities between the 2015 CCM KPPRO and the 2014 Reebok KPPRO, there are two points that need clarification. First, while the design of the 2015 CCM Pro knee-pads is indeed 'revolutionary', it isn't so in the sense most might expect. What Patrick Lefebvre has done, in short, is to revolutionise a very old design: the hinged knee protection that originally appeared (in goaltending) in the Daignault-Rolland (later D&R, no relation to the current' 'DR') GK10 that Patrick Roy used to such great effect: It's hard to see in this picture (I don't have a reference pair, sadly, any more) but the crux of the GK10 design was the hinge created by the pair of rivets, one on either side of the knee. The design principle is identical to a more recent pair of construction knee-pads -- the KP Industries UltraFlex KneePro III -- that have found a great deal of use in martial-arts and other similarly athletic circles: (Amazon link) While the Ultraflex III won't work for goaltending -- the upper shield is unpadded, and the plastic is too tacky/sticky for the pad to rotate around it -- CCM has done the next best thing: updating the venerable three-piece knee-pad design to incorporate a superior lower third that is far more comfortable and FAR less prone to slipping down the calf, and attaching that lower third using a GK10-style riveted hinge: (Detailed pictures courtesy of The Hockey Shop's product page) From the front, the lineage of Michel Lefebvre's original three-piece Koho knee-pads is apparent, with a tapered upper shield (1) descending behind a faintly kidney-shaped main shield (2), which covers a lower shield that wraps around the knee to attach at the top of the calf (3): As you can see, the main differences between the original Michel Lefebvre Koho knee-pads and his son Patrick's 2015 CCM model are the addition of the riveted hinge to join the lower third to the main shield (instead of three flimsy little pieces of elastic on the Kohos, not pictured), the significant enhancement of the lower third itself, and -- most importantly -- the change in the shape of the plastic knee-cap from the 'ball' shape of the Kohos to the flatter profile of the CCMs. This last point may not sound like much, but it is absolutely crucial. Some goalies could wear Michel Lefebvre's original three-piece design without any issues, but some goalies were left seriously bruised and in some cases bleeding like stuck pigs from the lower lip of the original hard plastic cap, which featured a lovely line of coarse stitching that made an already sharp edge feel like a steak knife. Incredibly, this design persisted for almost a decade in various forms, through the RBK and Reebok brandings, and even the firstigeneration CCM revival knee-pads. Other companies -- notably Vaughn, Brian's, and Bauer, after a brief and disastrous copy of the original Koho design in 'Halloween colours', which Itech also attempted -- tried to fix this problem by replacing the lower third with a simple low-density foam cup, but this left a serious gap in protection at the bottom of the knee-cap; when in the butterfly, pucks could find their way straight to the bottom of the patella. These three companies (and others) experimented with the addition of an enormous fourth shield to the design, covering the face of the other three, but this had serous drawbacks in weight and mobility. the other perennial problem with the three-piece design was that unless you had huge calves and extremely skinny thighs, the knee-pads would slip down. This lead to garter-belts, hockey socks and roll after roll of clear tape, and a variety of other method to keep them up. In 2014, Patrick Lefebvre took the first tentative steps in correcting his father's knee-pad design. His new (now discontinued) Reebok knee-pad trimmed away the bottom lip of the hard plastic 'ball' cap, but left the rough line of stitching in place. The lower third was significantly improved, adding a much more robust strap, a great deal more padding, and a simple 'donut' for the knee-cap which InGoal inexplicably claimed had something to do with Jofa's JDP technology. P.L. also added the riveted hinge at the knee, but did not reinforce it, and, bizarrely, only put a rivet on one side: (Thanks to Total Hockey for the ONE clear shot of this on the entire internet -- showing that there was, in fact, just one rivet on the medial [inside] aspect of the knee-pad.) The reception of the the new 2014 Reebok knee-pads was both mixed and short-lived. Some InGoal readers commented that the rivet on the one-sided hinge ripped out; InGoal suggested, weirdly, that their pads were to blame. (Ultimately, one reader reported back that The Hockey Shop had replaced his failing rivet with a larger, higher-quality one that solved the problem, and suggested reinforcing the underlying fabric-- which was exactly what CCM did!) Several long-term Reebok knee-pad users on Goaliestore.com reported that the 2014 knee-pads stayed up and in place so well that they were able to, at long last, do away entirely with garter-belts, clear tape, and socks, but reported that they had been quietly discontinued-- presumably because of the impending CCM update. As The Goalie Crease (the store, not .net) observes, the 2015 CCM Pro knee-pads are clearly built on the same foundation as the above 2014 Reeboks; however, TGC implies that they are the same product when the CCM update is, in fact quite significant, introducing key changes to the design (as we see above): namely, that the hinge mechanism is now bilateral *and* properly reinforced with heavier rivets, washers, and synthetic leather, that the plastic knee-cap cap has been further slimmed down, and the line of rough stitching along the bottom has FINALLY been eliminated, ending more than a decade of pain and suffering. The sole area of concern I have is the use of air-knit fabric around the Velcro attachments. I love air-knit for the way it breathes (even if it is surprisingly heavy) and how quickly and thoroughly it dries out, and it can handle a great deal of abrasion under ordinary conditions, but Velcro absolutely shreds the it. Air-knit knee-pads are a great idea, but CCM might want to consider some kind of loop-back strapping on future versions. The 2015 CCM knee-pads appear to be, at long last, a sound expression of this essential design, drawing on another legendary Quebecois design (the D&R GK10) for the final touch. It's not every day a hockey product is both functionally sound *and* historically significant!

I second the above. The cheapest and most convenient empty ice you'll ever find is the stuff sitting beneath you while the puck's at the other end. Given that it takes elite players in full-stride about 8 seconds to go end to end, you'll have plenty of time to recover. You'll also get a much, much better workout from your time-on-ice. Now, in fairness, Optimus seems to have complained repeatedly in this thread about an imbalance in his regular skate that leads to him getting tons of shots and pressure while the other guy stands idle. My suggestion, in that case, would be to arrange a partial or occasional switch: for example, playing the first half or even the first 10-15min in the 'slow net', then switching into your regular end, or alternating ends every other skate. I've found myself in a similar skate -- the 'captains' mutually agreed to stack one team against me -- and every once in a while I do ask to switch things up for part of the time, even though I also skate by myself for an hour beforehand, and do enough coaching that I have plenty of opportunities to work on pure technique. The one qualification I would add to Bender's comment above is that it is possible to play defence-free or unrealistic scoring chances in ways that don't create or reinforce bad habits. This is something I've tried to teach every goalie I've ever coached, because in almost any practise they'll have to face some kind of silly situation; there are only a tiny number of coaches who always produce well-structured drills from a goaltending perspective. The key is to recognise that they're silly situations, and make a conscious effort to defeat them. For example, one of the dumber tactics out there is extending your stick into an almost full paddle-down reach in an attempt to cut off any possible passes. Against patient, cognisant shooters, if used regularly, this will get you torched every time. But if you throw it out every once in a while, it can confuse the hell out of the puck-carrier in a 3v0. Hasek did this brilliantly a few times, usually in conjunction with a Hasek Roll. You can also try stuff like extremely obvious angle-baiting (showing the puck-carrier one overwhelmingly tempting option that you are in fact 'sitting on') or verbal interference ("Don't pass to him! I've got him! Don't make that pass!"). Try a head-first diving poke-check followed by a Scorpion-Kick if the guy flips it over you. Try anything. The worst thing you can do in a stupid situation is to treat it like a sensible one: that's both frustrating and ineffective. Have some fun with it.

Beautiful: thanks.

Hahaha that's brilliant. Venting topic of the day: ingrates: contemptible, loathesome, self-aggrandising ingrates. What kind of fool sees a free, volunteer skills session as something that should exist for his son's sole benefit, then attempts to submarine the entire program when someone has the temerity to suggest that it should serve everyone equally? The kind I'm dealing with right now, that's who. Classic reasoning, too: his son, who is barely a competent house league goalie and no kind of athlete, *would* be a superstar lock for a first-round OHL pick if only everyone would see his potential, and kowtow to his ridiculous demands. I know I shouldn't be surprised, but it's honestly the first time since I was 15 I've had to deal with this kind of bullshit, and I'm even less impressed now than I was as a kid.

I'll see your Frankenskates and raise you a godforsaken relic.... to be updated!

Haha-- just found my brother-in-law some Quik-Blades: they'd look even better! (Speaking of, does anyone know if there's a generic tool to turn the tension nut on the back of these monstrosities? --edit: NM, found a hex socket that works, or, in a pinch, a pair of very small snipping pliers.)

That was one of the first things I noticed about the S11-to-S17 lines: the soles were incredibly thin, and completely without composite reinforcement throughout most of the middle of the sole: just whatever kind of semi-transparent resin they used.

You would!

Possible dislocated scaphoid turns out to be mere synovial hernia: one syringe later, I've got my damn wrist back.

That's what I love about this arrangement: it's giving Pete access to an enormous range of materials and expertise, but, more importantly, *time* to devote to design that he rarely had when he was running a business on top of a gear lab. Just as with his revolutionary C/A design, there are a number of conventions in glove and blocker design that have gone unchallenged and unconsidered for a very long time.

Minitru LitDep cellies exactly correct timing of reply.

Recentest update doubleplusungood.

The gloves are carried over from 2012: Dr. Smith is taking his time on the gloves, which are (per his statements) on track for 2014. His gloves didn't really change much over the 'Smith Hockey' period, so I would imagine he's looking to make a pretty big leap forward.

Eric Marvin and the Warrior Goalie Design Team (Pete Smith, Neal Watts, and Frank Dagneau) did a Google Hangout yesterday evening with a few other folks, hosted by Total Goalie, and the video is available here: http://www.youtube.com/watch?v=Mx-EAD2oZ78 Some very cool shots of the Ritual gear in motion: well worth checking out over the Hockey Day in Canada weekend (or Superbowl Sunday, which I guess is also happening).

Speaking of my earlier issues, I recently had a *terrific* set of FBV sharpenings (100/50) at the National Sports at 1770 Dundas East in Mississauga, at the hands of Paul D. and the recommendation of our own pmurphy17 -- with ZERO guff about FBV and goalie skates. If you're looking for a good FBV sharpening near Toronto at a very reasonable rate, check them out.

Well, to be fair, there is actually no good information on goalie helmets either. Woo hoo, someone certified it with a drop-test -- oh, wait, they never tested impact force transmission. Guess I'll just screw up my eyes and pray really hard... The belief that a good composite shell and reasonably soft, resilient foam may be correct, but it's no more well-founded than the belief of pro players that VN is better than EPP. The guy who's done maybe the best testing work out there is Blaine Hoshizaki of UOttawa. He's a good man -- and thorough.