Aggie

I finally got to test out my 70 flex and 77 flex Silfverberg mid kick red lines I picked up months ago. They are light, well balanced and shoot well. Need to have more ice time with them, but so far I’m pleased.

Skatetown in Roseville started up beer leagues a month or ago.

I have the same issue, but only with certain brands of grip sticks. I also store my hockey sticks in the garage, where it can reach over 100 degrees in the summer. I’ve had the grip turn into goo for the following brands of grip sticks: retail True, retail STX, pro stock Easton, one pro stock Warrior, and the worst, TPS rubber.

I have a few Nolan Patrick sticks and they are a P91A max height, unless you get the version with the toe kink!

Profile 4 – Quad 0 Steel – Step Steel 272 Hollow – 100/50 FBV About Me – I started skating and playing roller hockey back in college around 1998. After graduating, I played roller hockey leagues for a few years before most of our team converted to ice in 2005. I am currently playing ice hockey at a Silver B level (rink has multiple Gold, Silver, and Bronze levels). Review – I’ve been going back and forth with the Zuperior M, Quad 0, and Quad 1 profiles the past few months, as initially it was difficult to tell the differences. Going back and forth a bit helped me differentiate between these three profiles. Compared to the Quad 0, the Quad 1 profile had a little bit more speed and stability. This is my favorite out of all the profiles I tried, but I would be happy with either the Zuperior M, Quad 0, or Quad 1. I can't go back to a single radius again! Huge shout out and thanks to JR, MSH, and Prosharp for this! Acceleration - 3.5 Mobility - 3.5 Stability – 4.0 Speed – 4.0

Profile 4 – Quad 0 Steel – Step Steel Velocity 272 Hollow – 100/50 FBV About Me – I started skating and playing roller hockey back in college around 1998. After graduating, I played roller hockey leagues for a few years before most of our team converted to ice in 2005. I am currently playing ice hockey at a Silver B level (rink has multiple Gold, Silver, and Bronze levels). Review – I’ve been going back and forth with the Zuperior M, Quad 0, and Quad 1 profiles the past few months, as initially it was difficult to tell the differences. Going back and forth a bit helped me differentiate between these three profiles. Compared to the Zuperior M, the Quad zero profile had a little bit more mobility with less stability. I felt that the speed and acceleration were similar. Acceleration - 3.5 Mobility - 3.5 Stability – 3.5 Speed – 3.5

Profile 3 – Zuperior M Steel – Step Steel 272 Hollow – 100/50 FBV About Me – I started skating and playing roller hockey back in college around 1998. After graduating, I played roller hockey leagues for a few years before most of our team converted to ice in 2005. I am currently playing ice hockey at a Silver B level (rink has multiple Gold, Silver, and Bronze levels). Review – I’ve been going back and forth with the Zuperior M, Quad 0, and Quad 1 profiles the past few months, as initially it was difficult to tell the differences. Going back and forth a bit helped me differentiate between these three profiles. The Zuperior M profile felt the most stable to me out of all the profiles I’ve tried. When I switched back to the 10’ single radius profile, this was really noticeable on transitions during games. I fell down a few times on the single radius in quick transition skating, but with the Zuperior M, there were a few times I may have wobbled, but never fell. Compared to the 10’ single radius, all categories improved. Acceleration - 3.5 Mobility - 3.0 Stability – 4.5 Speed – 3.5

Profile 2 – 9’/50mm/10.5’ Steel – Step Steel 272 Hollow – 100/50 FBV About Me – I started skating and playing roller hockey back in college around 1998. After graduating, I played roller hockey leagues for a few years before most of our team converted to ice in 2005. I am currently playing ice hockey at a Silver B level (rink has multiple Gold, Silver, and Bronze levels). Review – This profile kind of brings me back to my roller hockey days. The stride feels more roller hockey like and clunky. My strides are noisier/louder as more blade hits the ice. I feel really stable, but quickness/acceleration is lacking for my skating style compared to my 10’ single radius. Speed was hard to rate as my top end speed seemed slightly faster, but took longer to get to top speed. In other words, skating in a straight line is faster, but in terms of hockey play (changing directions, stop and go, etc.), I felt my overall speed/agility was slower. This profile is not for me. Acceleration - 2.0 Mobility - 2.0 Stability – 3.5 Speed – 2.0

Profile 1 - Control set Steel – Step Steel 272 Hollow – 100/50 FBV About Me – I started skating and playing roller hockey back in college around 1998. After graduating, I played roller hockey leagues for a few years before most of our team converted to ice in 2005. I am currently playing ice hockey at a Silver B level (rink has multiple Gold, Silver, and Bronze levels). Review - Since this is my control set and what I've mainly been skating on the past few years, my ratings will be in the middle for all categories. All other profiles reviewed will be compared relative to this. Acceleration - 2.5 Mobility - 2.5 Stability – 2.5 Speed – 2.5

I’d be down for the Kesler/Toffoli/Setoguchi curve. Would be neat to also have Arnott pro and Styles/Sundin pro patterns. So hard to find retail heel curves nowadays...

CXN Step Steel is easier to find compared to Easton CXN steel. I'm hoping to eventually get True skates with CXN holders mounted.

The True website used to let you order skates directly up until a few days ago. Makes sense though if you can only buy them though fit centers now. Wouldn't want to undercut the fit centers.

I rotate between a Mako 2 and a Mako M8. At first I found the Mako 2 a little harder to break in because of the poofy tongue. But now that the tongue is broken in, I think the Mako 2 is slightly more comfortable than the M8. Other than the tongue, there isn't a huge difference between the two models to me.

It is actually very convenient and can be cheaper than local sharpening if you have multiple runners. Ever since I moved away from the Bay Area over five years ago, there isn't a place nearby that offers FBV. Tried BFD and ROH at local rink, but didn't like either after skating on FBV for years. Through this board, I've found multiple shops that offer a great sharpen by mail service.

Or maybe four sets of runners!

Those are my kind of curves! I wish I had purchased more of those TPS P31 sticks back in the day! I only have one regular yellow P31 TPS Repsonse and some pro return Sundin Innovative Novius OPS remaining in my stash.

I mainly rotate between the S19, RS, Widow, and Diablo SE. They are all composites. From left to right: TPS XN10 Nilson pro return, TPS standard R8 shaft with Drury Z carbon, three tapered TPS R8 shafts (Warrior Arnott pro return blade, TPS R8 Frolov blade, Drury synthesis blade), TPS R10 Frolov, Widow SE grip Kovalev, Diablo SE grip W12, Diablo SE grip Kovalev, RS grip Parise, two RS Parise (75 and 85 flex), S19 Drury, SE16 Drury, Dynasty Kovalev, Widow SE Kovalev, Widow Kovalev, Diablo Kovalev, three R2 XN10 tapered shafts (Warrior Arnott, Easton Styles, Easton Drury), two Redlight XN10 shafts ( thanks JR!) with TPS morrow blade and warrior Kovalev blade, Combat .52 HCR, Combat .52 tapered shaft with Drury blade, tapered One95 shaft with Harrow #3 blade, tapered X60 shaft with Harrow #3 blade, Winnwell GX8 OVI clone, Innovative Novius pro return Sundin, Base Drury clone, Eagle X70 Talon curve, and Mission tapered flyweight with Drury t-flex blade.

They are the cheap Franklin ones. Started using them over a decade ago just to have consistent t hand feel from stick to stick. Too lazy to switch out to Tacki grips, though I use those on my goalie sticks.

Trust me, the wife does not like all my hockey junk! I should've never joined the Easton MB, corebeam, and now MSH gang back over a decade ago.....

Haven't posted in a bit, since moving to the Sacramento area a year ago. Here's my current "in use" stick rotation. Sad that I am down to playing once a week.

I have the goat palms on custom Easton 800's from PSHG. If you ever had goat palms on Eagle gloves, they are very similar. A little thicker than MSH2, but very different. Goat is tacky and provides grip. I have always loved goat palms because I prefer non-grip sticks, but like a little grip without being overly tacky.

Any righty's available?

Does anyone know if Warrior has stopped offering custom Creepers? On their website, you can select Creepers, but the customizer only let's you play around with the Franchise glove.

Maybe it just depends on what year model Creepers? I just got the "newer" Creepers from PSHG and they are wide fitting.