Cosmic

I realize that the Gionta is niche, and that there are already toe options. I also sense that the youth will not like the Gionta, as they seem to like loft for ease of lifting. This old timer grew up on pretty much Iginla equivalents (I seem to recall everything being Iginla when I was a kid in the late 80s), so I learned to lift the puck pretty easily; almost too easily as I sometimes have to try to keep it down, even with the tame P88 (TRUE MC 88). Would be nice I suppose, if the Gionta were available for custom order on the SBP 6.0 blade side of things. I'd pay a little extra just to have a run at it. I loved the BASE P71 Malkin Pro for ripping hard wristers without any sort of focus on mechanics, it was just so hard to stickhandle with. I suspect that the Gionta would be the best of all worlds (admittedly, for my "unique" mechanics and preference).

I use the MC (or W88 in Warrior) so I am satisfied with TRUE presently, and checking the TH, IW and HM websites daily to pick up some A6.0 SBPs when they become available in the MC pattern. If TRUE wants to add this to the discussion of potential patterns to bring back, I have only heard great things about the Warrior Gionta. I never got a chance to use it, but I think I would like it.

Amen to that. I have been using the A & R Shin Sleeves for a couple of years (with straps on my Reebok 20K Pros cut off). They lock the shins in place better than straps, tape and the hockey outer socks possibly can. Hypothetically, they should retain heat, but I do not notice my shins getting hot.

Pro spec, pro stock or not; it looks like VH will be my next skates. I wear (pro stock) shot blockers (over retail Easton Mako 2s) and the things are cumbersome (better than the retail blockers but I still notice them), so to be able to have the blockers built into the skate is gonna be huge value. So whenever the Mako 2s break down, then I figure that Scott VH will just keep getting better between now and whenever I place my order, and yea pro spec/ pro stock/ Cosmic spec or whatever makes zero difference to me, as long as I get this perfect custom fit that everyone is raving about (With hopefully a bit less residual glue that some have complained about).

Custom Pro Repair (Pat Rivest). http://www.customprorepair.com/ These were pro stock Jimmy Hayes APX2 gloves (non-PORON lined) that I wanted beefed up, and re-palmed: I asked Pat to taper the backhand plates to fit the profile of the flex cuff, so that I max on protection, without interference when my wrists flex: These thumb guard half moon pieces prompted this customization, and then I figured that if I am paying shipping over the border both ways, then I may as well go all out. If anyone wants to save time in dialoguing with Pat (he's cool, but he's busy; and I highly doubt that he wants to have the same 5 conversations that he had with me, 100 more times in the next 5 years, so he can identify what people may want), then here is what everything is called, and the price in Canadian dollars:

Tons of vids on Yo A few of the vids on YouTube about MLX, if that's what you are looking for: MLX Skate Review: MLX vs Mako:

Figured it would be easier to just show you what I was talking about, in a video: https://www.youtube.com/watch?v=_ZL0nCLkUHs&feature=youtu.be

I used the scissors with a little curve on the end, cutting away from the tongue itself. The key is to leave to a little bit of felt, because the felt seals the tongue inside, about 1/8 cm off of the tongue, if that makes any sense. In other words, cut too close to the tongue, and you can see a strip of tongue that is exposed. And yea it helps alot. There is alot of volume of felt that I got rid of, and I am not busting out of the forefoot as much. Plenty of us are busting out in the middle, failing the (eyelet) pencil test miserably. It does not seem to matter though. I have horrible pain on the under/ outside of the balls of my feet in almost every pair of skates I have tried on, except Mako/ Mako II and my inline skates (Mission V10 Revolt or whatever they are called- the white with yellow laces and rainbox hologram). I can go all day in my Makos though, and no pain. I also never have pain in sneakers or walking barefoot, just in hockey skates (Reebok, Bauer, CCM, etc.).

How can I get a pair of SpeedPlates, without buying Vapor 1X or 1S or 1N skates? (assuming that your were able to accomplish this) Is it possible yet?

What would the Broski say about that? In all seriousness though, my Mako 2s are holding up brilliantly; playing 3x/week, for almost 1 year (I keep seeing concerns of durability). To accommodate the low volume in the mid forefoot (is that what the area is called between eyelets 4-7?), I trimmed the felt: So far so good (after a few months), I got the idea from Dougie Hamilton (1:34 or so on):

I was Large in CCM CL and they were short on me. Large in STX Surgeon 500 is perfect. I am 6'2, athletic build with arms that are proportional to height.

How is the weight differential between the 1X Pro and the APX 2 Pro Gloves?

Anyone know when the Surgeon 300 shoulder pads will be available?

I am thinking about putting in an order for Warrior Custom QR1s. Questions: 1) For the outer shell material, what is the difference between Tufftek, Covert Mesh and Dynasty Mesh? 2) For fang accent, what is the difference between Carbon, Traditional, and DS Buck?

That's good news. I am starting to develop Mako bumps again in my Mako 2s. In the Mako 1s, the chafing came on the first skate. Now, the bumps have returned about 85-90 sessions in, same place, a bit different of a presentation though.

I thought that I read maybe in the 2015 Catalogue Review section that this is the end of the Mako series.

Helmet: CCM Resistance with white Resistance 300 cage Pants: Warrior Dynasty Girdle Shell: Warrior Dynasty Girdle Shell Shins: Reebok 20k Elbow: CCM Crazy Light Gloves: Bauer Vapor Matrix Pro Cup: Diamond MMA Skates: Easton Mako 2 w/ Skate Fenders Stick: 100 flex Bauer 1X shaft with BASE Malkin BC71 pro curve (Supernatural); ButtEndz Twirl grip Bag: GRIT Sumo GT2 Goalie Base layer: X Bionic Evo Energy Accumulator (check Sierra Trading post for up to 75% off- would never pay retail for these things, but they are nice)

The red carbon fiber patch (tape or whatever it is?) is what makes the skate look good. I never liked the old material that VH was using for custom colors, but that red material looks awesome.

I had a look at the Easton Synergy HSG girdle at HM when I was stateside over the summer. Easton's heavier than the Warrior Dynasty girdle (according to online retailers, not really noticeable in person), and seems less protective in the hip and kidney protection. The only thing I liked better about Easton's girdle is the thigh guard strap for custom fit. I was not really feeling the Easton girdle so I did not bother trying it on- the material seems like it is destined to rip quickly (could be wrong, just looked cheap), and I like to feel more armoured up than this would provide. Bought the Dynasty girdle instead, and am very pleased with the purchase (Dynasty is so light and ultra protective where the hard foam guards are).

Does anyone have a release date for the STX Surgeon 300 Shoulder and Elbow pads? I had heard September, just curious if there is a hard date of when we can expect to see these in stores, if they will even be in stores? I could not find any STX 500 Protective gear in Los Angeles/ Orange County area this summer. HM told me they were online only items, and TH has these looking like online only as well.

Mako M7 skate looks identical to Mako 2 and 8 also, moldwise- I think the difference is more fiberglass in the composite, so it is slighly heavier. Aside from that tho, at $400, and hopefully with it going on clearance soon since I heard that Easton is launching new lines of skates, this could be a potentially great deal in 6-9 months.

I was completely speculating about SkateFenders 2.0. I do not have a clue as to their future plans; I am just keeping an eye out to see if they improve on the design.

I wear the SkateFenders Full Pro, with my Makos. I play wing too, and as I closed in on a forecheck and veered away from the D man, he fired a light saucer pass off the tendon guard bolt that left me with a knot that looked like a second ankle next to my real ankle, for a month or two. I took a light saucer pass off the middle of my instep too (earlier, on a different day), and it did not feel nice, but no damage was sustained. So, SkateFenders have been worn since the pass off the bolt. I do not love the Fenders- they seem to feel clunky compared to how I think the ShotBlockers would feel, but they are less expensive and more thorough in coverage than the ShotBlockers, so I am just sticking with them until maybe SkateFenders 2.0 launch. I seem to always be taking saucer passes off the insides of my feet/ legs. The most recent one left a softball sized bruise on my inner calf that last about 10 days. No big deal, I did not even feel that one, just noticed it after and I know what play it had to have happened on. Point is, the feet are rather important for us to be able to get around, and it would seem that one would be inclined to want to protect them.

Same here- I am bulging through the casing for about 4 eyelets around the middle, no problems though.

Previously used: Oggie Ergo, Tacki Mac Ribbed Wrapped Command Weight Barely weighs anything. Some weight up top would not bother me, to make my stick a little less blade heavy. This is not the responsibility of the grip though. Regardless, weight is a non-factor. n/a or 10/10 Balance Again, due to weight not being a factor, balance is not impacted. n/a or 10/10 Grip There are also different size and shaped bumps on the grip, which seem to allow the hand to lock onto the shaft with this grip. I like alot of grip for my top hand, so that I do not need to waste energy squeezing the stick too hard when forechecking. 10/10 Feel Because the wrap is so thin, I have a newfound feel on my stick that I had not previously experienced with the Oggie Ergo (I did not like how soft the rubber was, and how much flex was coming out of it) and Tacki-Mac Ribbed Wrapped Command (very thick, dulls the feel). I just got back into playing after a 17 year layoff, so this is a welcomed, newfound, and appreciated experience. The knob is extremely, thin, like the Tacki Mac Kane. This can cause some durability issues with my gloves, but no big deal, I can just get them re-palmed if necessary, and is a sacrifice I am willing to make, in order to get the stick feel and control that this feature allows for. 10/10 Durability You will notice in the pics that I leave a bit of space between the knob and the top of the shaft itself. This is due to my having ripped through my first grip, because my hand was inadvertently pulling on the grip, wrapping it over the shaft. The top of the shaft then tore through the grip, rendering it pretty well useless. I had to tape it up to hold it together, by which time the point of the grip was null and void. As I was dealing with this issue, Rob emailed me and asked how I liked my grips (I did not initiate this exchange of dialogue, well done Rob), and I told him what happened. He sent me a replacement free of charge. So, Customer service 10/10. Durability score pending. It is possible that I simply did not install the grip properly, or maybe I did, who knows? Regardless, I am giving the grip a bit of space at the top so that when the my palm pulls the knob toward the top of the shaft, it has room to move up, without getting pulled over, and sawed by the top of my shaft. Even with this space, however, the knob is still getting pulled up. I think that if these grips were somehow engineered like golf club grips, so that the rubber formed a wall at the top, preventing the knob from getting pulled, then this problem would be solved. Or, I can superglue the top of the grip, and see if it holds. It is worth nothing that these grips do not lock onto the shaft, in the way that my Tacki Mac ribbed wrapped commands did. The Tack Macs, once on the stick, seem cemented on (which I like). The ButtEndz do not really lock on, but they do not slide around either. There just seemed to be a bit of variability at the topf of the grip, where the knob is. pending/10 Overall I'm happy with it. I do not see any way to improve upon this design, and this is my grip of choice and I expect to use this grip for a long time coming.