Slate
Blackcurrant
Watermelon
Strawberry
Orange
Banana
Apple
Emerald
Chocolate
Marble
Slate
Blackcurrant
Watermelon
Strawberry
Orange
Banana
Apple
Emerald
Chocolate
Marble
Larry54
-
Content Count
968 -
Joined
-
Last visited
-
Days Won
16 -
Feedback
0%
Everything posted by Larry54
-
I'm Canadian, and it took me a little while to "get" it. But I'm not from Ontario let alone rural Ontario. 😄
-
But what's the difference in weight between two True skates of the same size, one with integrated shot blockers and one without? My blockerless VH skates weigh around 830 grams each. NicholasG's skate weighs 1020 grams. That's 190 grams difference but my skates are around size 6.5 with size 254 LS2 holders, whereas his are a couple sizes larger with size 272 Step holders. So it sure doesn't look like the integrated shot blockers are "much heavier" than external ones if at all.
-
Out of curiosity, is the extra weight of the integrated shot blockers more or less than the weight of conventional shot blockers / skate fenders? Assuming it's less, I could see why someone who would have worn shot blockers anyway would want the integrated ones, while someone who doesn't usually wear them might not like the extra weight.
-
That's assuming the Bauer size 9 were properly fitted. If your toes brush the Bauer toecaps, your assumption is probably a pretty safe one.
-
Rusty Staub
-
The "glue" issue looks like some kind of clear coating rubbing off. It might have something to do with the way the blue lines/graphics are applied to the liner. My first pair of VH skates had grey Clarino liner and nothing like that happened. After 3 years of use, the liner just lost a bit of its original sheen in some spots. I got my more recent pair just before True came into the picture. It has a brown Clarino liner and also doesn't have those True blue graphics, and after a year there is no sign of wear like in your pictures. As for skipping the top eyelet, if you place your True skate beside your old skate, you might see that the True's top eyelet is about the same height as the second eyelet of your old skate. That was the case when I compared my VH skate to the Bauer Flexlites that I wore previously.
-
Just to give an idea, with insoles removed from all the following skates, my old Bauer Flexlite 4.0 skate is 750g. My first VH skate that I got when they first came out is 730g. Both have fairly worn LS2 steel in a 263 holder. My newer VH skate which I got just before True entered the picture weighs 820g and I didn't order the optional shot blocker protection. It has Step steel in a 254 holder. I don't notice the extra weight that much, but I had heavier Graf Sidas insoles in the first two whereas I have the stock VH insole in the last skate. P.S. As far as blacking out the logo, I lean toward leaving it. And I prefer white laces. But in a game situation, I don't ever notice what others are wearing anyway. My focus is elsewhere.
-
There are a few posts from this thread starting here which might interest you:
-
Just want to add that Sniper9 said that his LHS installed 2 steel rivets on the latest holder where True had installed 2 copper rivets on the original holder.
-
I think it was about CCM inner sole.
-
Is there any kind of concrete study to justify quad profiles, or are we just relying on the word of ProSharp and those who promote it, anecdotal evidence, and to a certain extent placebo effect? In a Google search I even came across some who've tried it and felt it's mostly a gimmick. Who knows, maybe it can even be detrimental if you're muscle memory is continually adjusting from one radius to another depending on what area of the blade your weight is on. I doubt that, but the skeptic in me wonders if it isn't just a solution looking for a problem, or just good marketing. Sometimes we do things just because we can. Maybe just a single profile with the right pitch is just as good. I mean I have all the speed and agility that I need with a simple 10' profile with neutral pitch, but I worked on my skating to get it rather than chasing new profiles. I just wonder if exploring quad profiles is worth my time.
-
I'm aware of that since it's good to maintain a profile even if it's just a simple single profile, just for consistency. I'm specifically asking about the use of quad profiles in the NHL. The people in these forums who deal with NHL players must have a good idea about what I'm asking.
-
Just out of curiosity, which NHL players use quad profiles? What percentage of them do?
-
First I placed the tongues in far enough so that the top of the Velcro tab aligned with the top of the Velcro on the tongue. But the Velcro on the ceiling of the toe cap was snagging my socks so I bought some 1/4" thick felt insoles at the dollar store. I cut the heel off of each insole just long enough to fit on the ceiling of the toe cap in front of the tongue. The felt stuck adequately to the Velcro so no adhesive required. And it removed some space above my toes while protecting my socks from the velcro.
-
The only creaking I've noticed on my VH skates is when I flex the right tendon guard with my hand. FWIW, I have LS2 holders.
-
I feel the same way. You can tweak the nut to get the tightness just right on the LS2. With the Edge, you're relying on close tolerances in the latching mechanism which can't be adjusted.
-
The more posts I read about the LS Edge, the happier I am that I chose LS2 holders.
-
I may be a bit anal about these things but I would ask to have them bake one skate at a time so you can focus 100% on each skate.
-
When I changed skates, I went from very worn LS2 263 blades to Step (default profile) 254 also in LS2 holder. There was a small adjustment period but I got used to them. The fact that the Step runner is slightly longer than an LS2 runner and is a bit flatter at the heel may have helped me avoid balance problems with the smaller holder. I don't know how the original Graf runner compares to the Step runner for Graf holder, but just changing to a Step runner might be an option if you don't already have Step runners in your Graf 254 holders.
-
That just looks like one of the older VH skate models but with True tongues. I wonder if he has bigger feet than Chara who has the regular True toe cap.
-
306 is 10mm (3/8") longer than 296. Does it look like the boot can handle an extra 3/8" of holder length without sticking out at the front or back? If yes, is the left skate shorter, and if it is, can it also handle a 306 holder?
-
I'm still using the stock footbeds with the red liner. I tried without the liner but ended up putting it back in. However, I cut a small section out of the red liner at the instep because I felt it pushing up a bit on my low arch. I thought about trying Speedplates to get the fully molded experience but my feet feel secure on the stock footbeds.
-
I've been wondering about that. The Step holders "look" massive but I was wondering if they actually were heavier. And how thick are the heel foxings? How do they affect the holder pitch?
-
I have a little tip for later VH skates, and True skates if they stayed the same as the VH skates. The velcro under the strip that attaches to the tongue extends into the toe cap all the way to the tip of the toes. My liner socks would get snagged by the velcro hooks and would probably eventually get runs and wear out prematurely. So I got some thick felt insoles at the dollar store and cut out some pieces to stick to the velcro on the ceiling of the toe cap. They stick well enough to the velcro so no glue is required. They also sort of act like powerfoot inserts and make the toe cap nice and comfy.
