Krev 86 Report post Posted May 16, 2013 Went a little nuts recently:Mmmmmmm T-Flex. 1 Quote Share this post Link to post Share on other sites
mack 44 Report post Posted May 16, 2013 Two Hull MMs as well mwahaha. Quote Share this post Link to post Share on other sites
HockeyStop 7 Report post Posted May 17, 2013 oh those grip lights :) Quote Share this post Link to post Share on other sites
flip12 708 Report post Posted May 17, 2013 All of those classic Eastons, loved those shafts, good finds. Quote Share this post Link to post Share on other sites
tvaughan4 16 Report post Posted May 17, 2013 Mmmmmmm T-Flex.Great stick. What stick currently on the market would have the closest flex profile to the T-flex? Just curious... Quote Share this post Link to post Share on other sites
Scotty 8 Report post Posted May 17, 2013 Great stick. What stick currently on the market would have the closest flex profile to the T-flex? Just curious...Any of Easton's tapered shafts over the years are essentially alike.The T-flex was merely lengthened and turned into the Synthesis, Synergy II, EQ50, and whatever other tapered shafts they produced after that. The construction of the Mako or Mako II may have changed, but pretty much anything with the compression molded graphite shaft and kevlar wrap is the same as the T-flex. Quote Share this post Link to post Share on other sites
Chadd 916 Report post Posted May 17, 2013 Any of Easton's tapered shafts over the years are essentially alike.The T-flex was merely lengthened and turned into the Synthesis, Synergy II, EQ50, and whatever other tapered shafts they produced after that. The construction of the Mako or Mako II may have changed, but pretty much anything with the compression molded graphite shaft and kevlar wrap is the same as the T-flex.it's probably entirely mental, but I always thought I got a little more whip out of the long hosel wood blades than the lower connection blades that followed the T flex 1 Quote Share this post Link to post Share on other sites
mack 44 Report post Posted May 17, 2013 For me it was the clear coat Easton had on their shafts. When they stopped putting it on their shafts around the Synthesis and gold ULs they never felt the same. Quote Share this post Link to post Share on other sites
flip12 708 Report post Posted May 17, 2013 (edited) Yeah, I loved the clear coat. I just bought my first Easton shaft in years and I'm not to happy with the matte finish. So many sticks are grip now. They just feel like my roommates used them for dinner and washed them as they usually do, leaving that protective film on them.it's probably entirely mental, but I always thought I got a little more whip out of the long hosel wood blades than the lower connection blades that followed the T flexMaybe it's not all mental--if the combined taper zone was longer because of the long hosel, that would make sense that there was more whip. Did they compensate by lengthening the taper zone on the shaft once they went to the shorter hosel blades? Edited May 17, 2013 by flip12 Quote Share this post Link to post Share on other sites
the_game 452 Report post Posted May 17, 2013 For me it was the clear coat Easton had on their shafts. When they stopped putting it on their shafts around the Synthesis and gold ULs they never felt the same.The original Mako Tapered shaft has the closest grip to the old clear coat from the Gold Easton Synergy days. Easton went nuts with the Mako II shaft on the grip version, but luckily I don't mind it.And Mack, if those 'Metal Matrix' Hull Z-Bubbles go up for adoption, please hit me up. I have a good home & an Easton Hull Composite blade just waiting for one.And I love how you threw in 'Metal Matrix', what year is it, 2001 & we're still on the Easton Message board or corebeam? Quote Share this post Link to post Share on other sites
Krev 86 Report post Posted May 17, 2013 Hey mack, I'll give that T-Flex a nice home for yah ;) Quote Share this post Link to post Share on other sites
Scotty 8 Report post Posted May 17, 2013 The original Mako Tapered shaft has the closest grip to the old clear coat from the Gold Easton Synergy days. Easton went nuts with the Mako II shaft on the grip version, but luckily I don't mind it.And Mack, if those 'Metal Matrix' Hull Z-Bubbles go up for adoption, please hit me up. I have a good home & an Easton Hull Composite blade just waiting for one.And I love how you threw in 'Metal Matrix', what year is it, 2001 & we're still on the Easton Message board or corebeam?I was on both of those boards as well, but had forgotten the name of the latter completely! Fun times. Quote Share this post Link to post Share on other sites
bolt91 31 Report post Posted May 18, 2013 Anze Kopitar Shell and Chicago Wolves socks. I'm on the hunt for Kopitar's gloves now! Quote Share this post Link to post Share on other sites
Krev 86 Report post Posted May 18, 2013 (edited) SE16's painted as RS2's. Got a nice curve on it. Square blade, somewhat closed heel. Pretty close to a retail Heatley. Taller blade than I'd like, but beggars can't be choosers. Edited May 18, 2013 by Krev Quote Share this post Link to post Share on other sites
tibnyi01 10 Report post Posted May 23, 2013 My b-day gift to myself! Travis Hamonic APX Pros! Quote Share this post Link to post Share on other sites
stevenmeier 4 Report post Posted May 24, 2013 (edited) got these beauties on monday :) Edited May 25, 2013 by stevenmeier 1 Quote Share this post Link to post Share on other sites
bigmaples 0 Report post Posted May 26, 2013 Went a little nuts recently:where did you pick up those bauer one 95's recently? i use a one 85 and i don't want to change really i want an 85 or 95 but can't find. Quote Share this post Link to post Share on other sites
flip12 708 Report post Posted May 28, 2013 Old's cool:New Old Stock Mission Amp Flyweight S, vintage 2000.I missed the cut of Mission's old boots with the three vertical eyelets--I rolled around in some Proto V's for years until the toe box on one boot split open. These are sweet. I love the look, the materials feel great, the tongue is incredibly plush and they're stiff down low yet very pliable up top. Can't wait to try them out. I'm just a little bummed the pitch3's on my old, unused s400's (size 11 / 46) are 288 and these notoriously bad holders are 280, but the boot fit's better in the Flyweight. Maybe I'll put CXN's on when I can.I know Mission used to say skate size = boot size, but that only works for me if I look at the European size, where I'm usually a 45. This 45 Mission as a 10 comes nowhere near my shoe size, where I can go down to an 11 if I ignore advice about room for the toes, but then that's likely due to all of that manufacturer inconsistency. Quote Share this post Link to post Share on other sites
Cavs019 707 Report post Posted May 29, 2013 I wish Bauer would release a skate with the Purefly/Flyweight supplefit? concept. They were a bit heavy relative to today's standards but my god were they comfortable. Quote Share this post Link to post Share on other sites
AIREAYE 248 Report post Posted May 29, 2013 (edited) I wish Bauer would release a skate with the Purefly/Flyweight supplefit? concept. They were a bit heavy relative to today's standards but my god were they comfortable.How close is Nexus to that? Edited May 29, 2013 by AIREAYE Quote Share this post Link to post Share on other sites
Cavs019 707 Report post Posted May 29, 2013 Unless your foot is shaped like the Titanic I find the Nexus is too wide all around, especially in the heel. The Mission skates also allowed for way more range of motion in the top 3 eyelets. 2 Quote Share this post Link to post Share on other sites
flip12 708 Report post Posted May 29, 2013 I'm going to get them baked at West Side Skate and Stick, but already they feel pretty nice. They remind me a lot of the Vapor 8's, just much more forgiving. That Vapor 8 tongue was crap. I remember cutting a bit off it or something. These things make me want to skate barefoot, which I usually don't do. I'd like to see how these compare in weight to the non-Bauer high end skates today. With a different holder setup, these seem like they could be quite competitive; the "driveshaft" feels massive, pulling the center of gravity to itself noticeably in my hand.I could go for a Supreme skate cut lower, with that suppleness built in...maybe I'll end up with one of Graf's imitative skates (G3 or 75 ultra, 9035 or something). I always look at their skates and wonder how much weight they build into those rather bulky outsoles. It seems they can't or just haven't been able to make the jump to lower profiles there, and no one else is even close to that traditional of a build in that area. Quote Share this post Link to post Share on other sites
capthockey 1 Report post Posted May 29, 2013 So I just got a face lift on my trusty CCM CL skates as my E- Pro holders had seen better days.Here are some pictures of the new modification:As you might see, I have already used the skates a few times, and Im absolutely in love with these holders. You really feel the difference from the E pro's especially considering the height and the new fushion blades (that Im happy with, although I have not used the skates for a long period of time as of yet)The skates are a size 8 and so are the holders, I was debating wether to go with a size 9 or 8.. But Im very pleased with the result. The skate is a lot lighter and feel kinda like a brand new pair of skates (maybe the new laces did the trick haha ). 1 Quote Share this post Link to post Share on other sites
Buzz_LightBeer 968 Report post Posted May 29, 2013 Solid haul from the Admirals garage sale. Quote Share this post Link to post Share on other sites
Chadd 916 Report post Posted May 29, 2013 Solid haul from the Admirals garage sale.Damn, that looks like a bigger haul than the winterfest road trip Quote Share this post Link to post Share on other sites