lyle.m23 0 Report post Posted January 4, 2009 is the se6 the exact same stick with new graphics as the sc6 and synergy 300 ??i ask because i think i read that the se2 is the new sc6 Share this post Link to post Share on other sites
starsfan71 9 Report post Posted January 4, 2009 Sorry for the barrage of stupid questions here but how much lighter is the se16 is then the sl or SE. I typiaclly don't care about the weight of sticks to much but I'm pretty curios. Share this post Link to post Share on other sites
lyle.m23 0 Report post Posted January 4, 2009 i think the se16 is slightly heavier than the se but that is to balance it out i dont know where the sl is in terms of weight Share this post Link to post Share on other sites
noodle3872 40 Report post Posted January 4, 2009 Didn't the Synergy SL weigh about 435G? Share this post Link to post Share on other sites
3hirty6ix 0 Report post Posted January 4, 2009 is the se6 the exact same stick with new graphics as the sc6 and synergy 300 ??i ask because i think i read that the se2 is the new sc6SC6 -> SE6SC2 -> SE2 Share this post Link to post Share on other sites
habsfan87 0 Report post Posted January 4, 2009 Didn't the Synergy SL weigh about 435G?425 for the non grip, not sure if the grip is different or not Share this post Link to post Share on other sites
Datsyukrulez13 0 Report post Posted January 4, 2009 Didn't the Synergy SL weigh about 435G?425 for the non grip, not sure if the grip is different or nothow heavy is the SE16? Share this post Link to post Share on other sites
Datsyukrulez13 0 Report post Posted January 4, 2009 is that for the grip or the non-grip Share this post Link to post Share on other sites
Scurvy 3 Report post Posted January 4, 2009 is that for the grip or the non-gripNon-grip Share this post Link to post Share on other sites
starsfan71 9 Report post Posted January 4, 2009 Still deciding between the SE and the SE16 :unsure:Im leaning towards the SE they really haven't shown me enough about the SE16 to make a confident choice on it. Share this post Link to post Share on other sites
Datsyukrulez13 0 Report post Posted January 5, 2009 Still deciding between the SE and the SE16 :unsure:Im leaning towards the SE they really haven't shown me enough about the SE16 to make a confident choice on it.i would say go for the SE, its on sale at alot of places, so why not? Share this post Link to post Share on other sites
xaero604 0 Report post Posted December 19, 2009 I'm going to threadjack and ask an entirely different question, but still related to the stick. Does anyone actually notice a real-world difference between the different year models of the synergy sticks?I ask because despite Focus Weight Technology (FWT) being declared by Easton as a new technology found in the SE16, I'm skeptical. I cut down my synergy II shaft a few months back and noticed that there was a piece of foam composite about 3-4 inches down from the butt end. Does anyone else find this to be suspicious? Share this post Link to post Share on other sites
Krev 86 Report post Posted December 19, 2009 Sticks have remained largely unchanged since the original Synergys and Vapor XX's. Every now and then we get a 'wow' stick, with a new innovation and tech, but those are few in numbers. The '05 Stealths, Red Vapor XXX's, and the Ballistik 52 Cal is what comes to my mind as recent 'wow' sticks.I'm a youngin compared to most here though, when it comes to remember sticks that were awesome. Shafts are the same way. Same stuff, repainted. Some discontinued. Just my take on it, though. Share this post Link to post Share on other sites
xiaozhoux 0 Report post Posted January 28, 2010 Can anyone confirm if the stick is durable? Mostly if the blade retains its stiffness? I don't want to shell out so much $$$ for a blade that'll go soft on me real quick. I'm lookin to buy one of these at a LHS that has a clearence going on and i need to know ASAP :)Thanks a bunch! Share this post Link to post Share on other sites
Stafford21 0 Report post Posted January 28, 2010 mine has been a tank so far, taken some real solid hacks with nothing but a small paint chip. I tend to take quite a few slappers in warmups and skate and shoot and I dont think the blade has started to soften at all. Hope that helps Share this post Link to post Share on other sites
Da Beez 0 Report post Posted January 28, 2010 mine has been a tank so far, taken some real solid hacks with nothing but a small paint chip. I tend to take quite a few slappers in warmups and skate and shoot and I dont think the blade has started to soften at all. Hope that helpsIt might vary batch to batch, I have a blue SE16 that broke quickly on the blade and has huge paint flakes. I ended up cutting the shaft high enough to put a regular non tapered blade in it. The shaft still works fine but it looks worse than any Easton I have ever had or any body else's that I have seen. Share this post Link to post Share on other sites
K9 Unit 1 Report post Posted January 28, 2010 Can anyone confirm if the stick is durable? Mostly if the blade retains its stiffness? I don't want to shell out so much $$$ for a blade that'll go soft on me real quick. I'm lookin to buy one of these at a LHS that has a clearence going on and i need to know ASAP :)Thanks a bunch!easton blade and duribility rarely go together but thats my experience Share this post Link to post Share on other sites
flashgordon 0 Report post Posted January 28, 2010 I recently went back to Easton because I wanted to go back to the Lidstron/Getzlaf pattern. Bought 2 SE16s and an S17. The blade on the first S16 split down the middle after three games - got a warantee replacement. The second SE16 started getting soft in the blade after very little use. Haven't used the S17 much but it's still fine. I like the SE16 shooting performance, but am unimpressed with the durability. I am not hard on my sticks. Maybe just my bad luck. Share this post Link to post Share on other sites
bostonjuniorblackhawks 1 Report post Posted January 28, 2010 Can anyone confirm if the stick is durable? Mostly if the blade retains its stiffness? I don't want to shell out so much $$$ for a blade that'll go soft on me real quick. I'm lookin to buy one of these at a LHS that has a clearence going on and i need to know ASAP :)Thanks a bunch!easton blade and duribility rarely go together but thats my experienceEaston blades usually take a year to go soft on me. It's neither bad or good. The blade on my old vapor xx is still stiff lol. Share this post Link to post Share on other sites
colt45 0 Report post Posted January 29, 2010 I'll also add to the crappy durability (in my experiences) with the SE16. I've broken 4 of them, in either the blade, or the hosel area.Its a quality stick, but for me, never lasted, so I switched from it.Just my $.02 Share this post Link to post Share on other sites
puckhoggy 0 Report post Posted May 30, 2010 how can you to tell if a SE16 is an acutal SE16? are there codes for prostock easton sticks like there are with prostock bauers? Share this post Link to post Share on other sites
Speedz98 15 Report post Posted May 30, 2010 quick question, So my se16 blade is finally demolished after 8 months of use. I cut off the blade so I could use the shaft and... there's no place to put a replacement shaft. I cut at the line where the blade and shafter are joined togetehr to make it a one piece. But its just like solid with a thin hole. So then I cut an inch up and same thing.. Is the se16 not able to be converted? Share this post Link to post Share on other sites
bostonjuniorblackhawks 1 Report post Posted May 30, 2010 quick question, So my se16 blade is finally demolished after 8 months of use. I cut off the blade so I could use the shaft and... there's no place to put a replacement shaft. I cut at the line where the blade and shafter are joined togetehr to make it a one piece. But its just like solid with a thin hole. So then I cut an inch up and same thing.. Is the se16 not able to be converted?Just heat that part up and chisel the solid piece that is left in the shaft out. The se16 can be converted. Share this post Link to post Share on other sites
Speedz98 15 Report post Posted May 30, 2010 Just heat that part up and chisel the solid piece that is left in the shaft out. The se16 can be converted.how do I go about doing that, you think my LHS has the ability to do so? Share this post Link to post Share on other sites
