Pro stock Bauer codes

[Darshu 0]

The prostock Totalones I've seen had the code O33 on them.

[BCheetham93 0]

Here's the code of my clutterbuck one95 pro stock

Is this a one95?

It's the same curve as a P92 basically

0977-5

95

A

[b33f 0]

Picked up a couple pro stock one95s. Codes are:

0931-4

82

C2

Read through the whole topic, didn't find much info besides the flex, 82? Anyone?

[Brian Harte 1]

Does that "C2" feel like it has a blade fused into it?

[b33f 0]

Not sure, I wouldn't know even if it did.

[Brian Harte 1]

if you tap on it with your finger it will have a dull sound where the blade and shaft are fused. If you were to tap the middle of the shaft, it would have a more hollow sound.

[b33f 0]

I haven't bought a new twig since about '06, so I'm not too familiar with these newer sticks. Are all OPS not just a shaft fused together with a blade? Is this one95 supposed to be fused, or no? In that last picture you can see a very subtle line on the lower part of the shaft, I always thought this was where the shaft and blade were put together? I stuck a drain snake down the shaft, and it is hollow for a couple inches or so below that subtle line.....

[mickz 107]

The prostock Totalones I've seen had the code O33 on them.

Just picked one up yesterday. Mine has "BAUER" on the name plate and:

TEST-A

82

R26

[mug25 2]

I bought a One95 pro stock...

I know the flex is 102, but can someone tell me what the other codes mean?

3331-1

102

D

[bostonjuniorblackhawks 1]

I bought a One95 pro stock...

I know the flex is 102, but can someone tell me what the other codes mean?

3331-1

102

D

D=One90

there are some bauer codes in the flex chart for future reference

[mug25 2]

D=One90

there are some bauer codes in the flex chart for future reference

So I bought a One90 that's painted as a One95? Fail.

[bostonjuniorblackhawks 1]

So I bought a One90 that's painted as a One95? Fail.

yup. still worth the money though. the one90 is one of my favorite sticks

[mack 44]

If that disappoints him I'd hope he never buys an Easton pro return.

[nhhockey8 0]

I bought a x:60 shaft and it has the code g15f any insight?

[tamtamg 12]

I bought a x:60 shaft and it has the code g15f any insight?

same as retail x60

[nhhockey8 0]

same as retail x60

Thanks

Also does anyone know where it came from the name on the shaft is Beacons?

[Cams 7]

I assume there is now way to determine for sure what flex profile a certain G3 stick would have?

[Buzz_LightBeer 969]

http://www.beaconsathletics.com/sports/m-hockey/masb-m-hockey-body.html

Perhaps?

[nhhockey8 0]

http://www.beaconsathletics.com/sports/m-hockey/masb-m-hockey-body.html

Perhaps?

I was thinking that because I bought it at tsr.

[DrDever 0]

I have a Total One Pro Stock stick from a CHL team. What I'm trying to figure out is what kind of stick is actually under that paint. I work at a pro shop and we sell retail Total One's and they arn't even close in weight and feel. It's a lot more heavier.

It has the following codes:

P92 (Backstrom/Naslund Curve)

95 (Flex)

O44 (I'm lost on what this code is, never seen the O44 before)

Any help would be much appreciated, thanks.

[SolarWind 23]

It has the following codes:

P92 (Backstrom/Naslund Curve)

95 (Flex)

O44 (I'm lost on what this code is, never seen the O44 before)

not sure if it's just me, but I've seen pro stocks with the second code being 95 just like above and NOT being 95 flex, but rather being 87. is it an anomaly or something else?

[nhhockey8 0]

Maybe a prototype? Or a real totalone? Does it have the textreme weave like the total one has?

[zachary 2]

My buddy has Jacques one95. I got the codes from him.

4118-1

117(flex)

OV1

Funny part is its a 117 and he cut a good 5 inches off of it...

Also someone said the OV1 is an Ovie clone but the pattern is nothing close. It''s straight heel.

[vaporboy12 0]

Any insight on what a G12E?

Its a 12k weave E.Staal

[ibeck 38]

I have a Total One Pro Stock stick from a CHL team. What I'm trying to figure out is what kind of stick is actually under that paint. I work at a pro shop and we sell retail Total One's and they arn't even close in weight and feel. It's a lot more heavier.

It has the following codes:

P92 (Backstrom/Naslund Curve)

95 (Flex)

O44 (I'm lost on what this code is, never seen the O44 before)

Any help would be much appreciated, thanks.

I don`t know what O44 means but O44 is the construction of the shaft. For example O33 means bauer doesn`t put the presision grip on the totalone shaft.