Easton Mako Skates

[JR Boucicaut 3792]

Those skates have been baked so many times over the Easton trip its not even funny. As jsykes said, they are not worried if they break down. I side on waiting 24hrs to skate on them.

Exactly; all mfgrs do that with demo product.

[Tyler Roy 86]

True. Life of demo gear eh? Makes a more comfey demo having skates that have been used and baked multiple times. My demos at EastonLIVE hapened to be brand new and out of the box first day. News to me.....realized they werent sharpened and looked like I couldnt skate first stride. Bad on my end not checking before making the big first stride. After gathering my pride and dusting off my pants I went and grabbed a sharpened pair.

Exactly; all mfgrs do that with demo product.

[jimmy 194]

My rep says, 20 min cool down, can absolutely skate same day.

[Tyler Roy 86]

Depends on who you talk to then. I have heard reps say things that I dont always agree with or hear one rep say somthing and the other somthing diferent. I know I always let my skates sit and cool overnight, cant make somebody stay off them but whats 24hrs really?

My rep says, 20 min cool down, can absolutely skate same day.

[jimmy 194]

I asked my rep to verify with Dave.

[Tyler Roy 86]

When I used them they were baked then skated on maybe 15 to 30 min later. I agree that they do feel that they were cool and I didnt feel that I was hurting the boot very much or at all. Cant argue with the man behind the boot but I'd still tell customers to wait a day, might just be me trying to be safe. Most people dont have a problem waiting overnight.

I asked my rep to verify with Dave.

[flyers10 57]

If a shop's oven only goes to 180 and these are listed to be done at 200, how many extra minutes should they be left in for?

[Chadd 916]

I asked my rep to verify with Dave.

When we talked to him in Vegas he indicated that a day was overkill but "hours" was still recommended and going right out on the ice after baking was not.

[AfftonDad 88]

I did re-did mine at home (trying to get rid of that rear ankle corner blister thing I'm getting) at 200 for 16 minutes in a convection oven with the oven still on and they were nowhere near as hot as when Total Hockey did them. Are some of the ovens at the stores actually hotter than 200?

Edited April 4, 2013 by AfftonDad

[Chadd 916]

I did re-did mine at home (trying to get rid of that rear ankle corner blister thing I'm getting) at 200 for 16 minutes in a convection oven with the oven still on and they were nowhere near as hot as when Total Hockey did them. Are some of the ovens at the stores actually hotter than 200?

It wouldn't surprise me if ovens were somewhat inconsistent.

[Cvwolves 0]

At the training I went to last Thurs, Dave specifically mentioned that the stiffness level decreased in accordance with sizing, so while the juniors are made of same material, their stiffness will not be the same as the seniors.

Thanks for the info. Purchased a pair at my LHS, and are they ever nice. After my son's first skate, he said they are even more comfortable than the Bauer he's been using for a year.

[iceman8310 105]

has anyone changed holders yet? and if so how does the boot respond or feel. I notcied a difference when I went to ls2 from cobra on my old grafs

Edited April 4, 2013 by iceman8310

[jimmy 194]

has anyone changed holders yet? and if so how does the boot respond or feel. I notcied a difference when I went to ls2 from cobra on my old grafs

Tomorrow I'm putting LS2's on a pair for a MSH member. He's only changing them because he has $500 of lifetime Titanium steel in LS2. But I'm sure he'll post how they feel after he skates on them.

[mjpisat 36]

probably a strange question here, but want to make sure i'm not messing anything up. after my first skate on these i checked the bolts/screws what ever you want to call them on the holders that hold the steel in place. they were a little loose so i tightened them down until i couldn't turn any more. is that how tight they should be? something weird i noticed. on both skates, both holders, the rear bolts are flush with the hole they sit in. the front bolts on the outside sit pretty far in the hole, but the inside bolt sits flush like the rear bolts. just want to make sure that's cool.

[AfftonDad 88]

Be careful not to overtighten! I haven't done it with my Makos yet but I have overtightened and broken the runners on CCMs before. That was before I knew you could get them too tight. Now I err on the conservative side. I'll tighten them until they are just starting to get a little resistance and then use them. If when walk on them a blade clicks, I'll tighten it a LITTLE bit more until it stops clicking. I would rather have to tighten a little more frequently than break a runner again.

[jimmy 194]

probably a strange question here, but want to make sure i'm not messing anything up. after my first skate on these i checked the bolts/screws what ever you want to call them on the holders that hold the steel in place. they were a little loose so i tightened them down until i couldn't turn any more. is that how tight they should be? something weird i noticed. on both skates, both holders, the rear bolts are flush with the hole they sit in. the front bolts on the outside sit pretty far in the hole, but the inside bolt sits flush like the rear bolts. just want to make sure that's cool.

The bolts rest on the holder's plastic, if tightened too much the head of the bolt can sink in. But looking at the bolts inside the bigger hole around them, the front one sits further in than the rear one. I checked 3 pairs, all are the same so that's normal.

Edited April 5, 2013 by jimmy

[smcgreg 81]

OK, took the plunge. Got em baked at the store and couldn't stand to leave without taking them with me. First skate tomorrow after cooling for 20 hr. I doubt I'll sleep much tonight.

[LobstaLOL 0]

OK, took the plunge. Got em baked at the store and couldn't stand to leave without taking them with me. First skate tomorrow after cooling for 20 hr. I doubt I'll sleep much tonight.

what do you mean - you're not wearing them in bed whilst you sleep?

[smcgreg 81]

what do you mean - you're not wearing them in bed whilst you sleep?

Well, yeah, but not skating on them until tomorrow.

Seriously though, if anybody sees this that's had experience, the LHS I got em at told me they don't need to be contoured/profiled. I was a bit skeptical. It doesn't matter, I wouldn't trust them to do it anyway, but I was wondering if those who have used them still get them profiled. My guess is yes, still get them profiled.

Any feedback will be helpful. I expect the first couple skates will feel weird enough that I won't know if they need it or not.

[mjpisat 36]

What skates r u coming from?

[Powerfibers 8]

Well, yeah, but not skating on them until tomorrow.

Seriously though, if anybody sees this that's had experience, the LHS I got em at told me they don't need to be contoured/profiled. I was a bit skeptical. It doesn't matter, I wouldn't trust them to do it anyway, but I was wondering if those who have used them still get them profiled. My guess is yes, still get them profiled.

Any feedback will be helpful. I expect the first couple skates will feel weird enough that I won't know if they need it or not.

From the difference in pitch, you might want to try them first and then see how you like the holder.

[kovalchuk71 212]

nvm

Edited April 6, 2013 by kovalchuk71

[Maceo40 0]

What is the proper way to mold them after a bake? Sitting? Standing?.....Both? one skate at a time or both together? Is there a specific Mako technique?

[mjpisat 36]

I dont know. I bought them at a shop where the guys had gone to some type of Easton work shop with Dave C. They said they got proper instruction on how to bake and spot heat afterward.

They actually baked them before I made my final decision. About 15 -20 mins baking then I sat in them for like 20. They fit so great I bought.

[smcgreg 81]

From the difference in pitch, you might want to try them first and then see how you like the holder.

Good point.

Thanks